Peyote Pattern Maker
Free. No watermark. No sign-up.
Or drop a picture on the preview, or paste one.
Charting a peyote pattern from a picture
Load a picture and name the bead
There are three ways in: the Choose picture button, a file dropped on the preview, or a paste. Then, under Beads, press Delica 11/0 or Round 11/0 to match what you stitch with.
Pick even or odd count
Count opens on Even, and Width in beads, the number of columns, then moves in twos from 6 to 100, starting at 24. Press Odd and it runs from 7 to 99. Colors runs from 2 to 24.
Note the row counts, then download
The box under the bead buttons reads, for the sample, Peyote rows: 38, with 12 beads in each, and Rows 1 and 2: string them together, 24 beads. Download pattern (PNG) prints both lines above the chart.
What the peyote pattern maker counts for you
Columns half a bead apart
Every second column is drawn half a bead lower, which is how peyote beads nest. What you see is the fabric, not a square grid you have to shift in your head.
Peyote rows, not only chart rows
One line across the chart holds two rows of stitching. The tool doubles the count for you and says how many beads each row takes: half the width.
The first strand counted
Rows 1 and 2 go on the thread together. The tool gives that number, so you know how many beads to pick up before the first turn.
Even count or odd count
Even keeps every row the same length. Odd charts a width such as 25, where rows take turns at 13 and 12 beads, and moves the half step so that both edge columns sit high.
Delica or round 11/0
A Delica in peyote is about 1.3 mm wide and 1.6 mm tall, a round 11/0 about 1.45 by 2 mm. Picking one reshapes the cells and recounts the rows.
Size of the finished strip
Twenty-four Delica columns and 19 chart rows measure about 3.1 by 3.0 cm, shown in centimeters and inches under the bead total.
Bead counts by color
Seed beads to use lists each color with its hex code and count. The sample needs 456 beads in 8 colors.
What is peyote stitch?
Peyote stitch is bead weaving done with a needle and thread and no loom. Each new bead is sewn into the gap between two beads of the row before, so a row holds only half the beads across and the rows mesh like the teeth of a zipper. It is also called gourd stitch. The peyote name comes from its use on objects made for Native American Church ceremonies, and the gourd name from beaded gourd containers.
With an even number of columns, each row ends with a plain turn. An odd number needs an extra turn at one edge on every other row, which is harder to learn. Most charts are drawn for Delicas, the cylinder beads MIYUKI introduced in 1982 for bead weaving. Turn a peyote chart a quarter turn and it is brick stitch. For that, use the brick stitch pattern maker.
Reading the peyote chart row by row
The chart starts at the top. With Count on Even, columns 2, 4, 6 and so on sit high in its first line and the odd columns sit low.
- Rows 1 and 2: string the whole top line from left to right, beginning with the bead in column 1. The last bead you pick up is the high one in the last column.
- Row 3: work back from right to left with the high beads of the second line: the even columns, highest number first. Pick up a bead, skip a bead, pass through the next.
- Row 4: return left to right with the low beads of that line: columns 1, 3, 5.
- After that: each line of the chart is two more rows, high beads first. The numbers down the side of the sheet count chart lines, so line 10 is rows 19 and 20.
- With Count on Odd: columns 1, 3, 5 sit high instead and the top line can be strung from either end. Each row of high beads has one bead more than the row of low beads after it.
More pattern tools
Perler Bead Pattern Maker
Turn a picture into a Perler pattern with a bead count.
Hama Bead Pattern Maker
Turn a picture into a Hama pattern with a bead count.
Artkal Bead Pattern Maker
Turn a picture into an Artkal pattern with a bead count.
Kandi Pattern Maker
Turn a picture into a kandi cuff pattern for pony beads.
Pony Bead Pattern Maker
Pony bead patterns for bead animals, key chains and banners.
Bead Loom Pattern Maker
Turn a picture into a loom pattern for seed beads.
Brick Stitch Pattern Maker
Brick stitch patterns with offset rows.
Alpha Pattern Generator
Alpha friendship bracelet patterns from pictures.
Perler Bead Letters
Type a name and get a bead letter pattern.
Peyote stitch questions
How do I start the first rows of peyote?
Pick up all the beads for rows 1 and 2 at once, the number the tool gives. For row 3, pick up one bead, skip the last bead on the thread and pass through the next, then repeat to the end. The strand pulls into a zigzag as you go. These first rows are the fiddly part, because the strand twists until a few rows hold it flat.
Why does the tool open on an even count?
In even-count peyote every row has the same number of beads and the thread leaves the last bead ready for the next row, which is the easiest chart to follow. Even count is also the version most teachers start beginners on, since nothing special happens at the edges.
Can I make an odd-count peyote pattern?
Yes. Press Odd under Count and the width takes the odd numbers from 7 to 99, with the row counts worked out to match. In odd-count peyote the rows alternate between one bead more and one bead fewer, and one edge needs an extra turn to get the thread into place. Choose it only when a design must be centered on a single column.
How do I count peyote rows on my beadwork?
Count the beads up one edge in a zigzag: the outermost bead, the one tucked half a step in beside it, and so on. Each bead is one row. Counting straight up a single column gives half the answer, because a column only has a bead on every second row.
How many columns wide should a peyote bracelet be?
Work it out from the bead. A Delica column is about 1.3 mm, so 12 columns make a band about 1.6 cm wide and 20 columns about 2.6 cm. Length comes from the chart rows at 1.6 mm each: about 100 of them, which is 200 peyote rows, for a 16 cm band. Use a tall, narrow picture.
Do Delicas or round beads make better peyote?
Delicas have straight sides, so they lock against each other and the surface comes out flat and even, which keeps a picture sharp. Round 11/0 beads leave a pebbled surface and are a little bigger: the 24 column sample grows from about 3.1 cm wide to 3.5 cm. Chart for the bead you will use, because the row count changes too.
Can I zip the piece into a tube or a ring?
Yes. A chart from this tool always has an even number of peyote rows, so the beads that stick out along the top edge fit the gaps along the bottom. Bring the edges together and run the thread from side to side through those beads. The design has to meet itself cleanly for the join to disappear.
Can I use this chart for two-drop peyote?
Not directly. Two-drop peyote picks up two beads at a time and treats each pair as one, so its chart is drawn in pairs. This tool draws one bead per cell. A single-bead chart worked in pairs would come out twice as wide, with every color doubled.
What kind of picture suits peyote stitch?
One with upright lines. Beads stack straight in each column, so vertical stripes and letter stems stay crisp. A level line has to step up and down by half a bead from column to column, and it reads as a fine zigzag. Dithering breaks the clean columns up, so leave it off unless the picture is a photo.
Does the bead list give Delica color numbers?
No. The colors are taken from your picture and shown as swatches with hex codes, not matched to MIYUKI's DB numbers. Take the list to a Delica color chart or your own tubes and choose the nearest for each swatch. Finishes such as matte, luster and silver-lined change how a color reads in the fabric.
Does it chart flat or tubular peyote?
Flat peyote, in even or odd count: a rectangle stitched back and forth. Peyote can also be worked as a tube, which is how pouches and beaded handles are covered. An even-count chart from this tool can be used that way if you join the first strand into a ring. Each round of an even-count tube then ends with a step up through two beads.