Artkal Bead Pattern Maker
Free. No watermark. No sign-up.
Or drop a picture on the preview, or paste one.
How to make an Artkal bead pattern
Start with a photo or artwork
Choose picture takes a file, and you can also drop one onto the preview or paste it. Photos, paintings and shaded drawings are where Artkal's long color list is most useful.
Pick a width
Width in beads sets the number of columns, anywhere from 10 to 116. Smooth shading needs room, so try 58 or more for a portrait. The number of rows follows from the picture.
Cap the shades
Most colors goes from Any up to 40. Every color is another bag to order, so look for the lowest setting at which the preview still looks right to you.
Read the list, then download
Artkal beads to use shows each S code with its bead count. Download pattern (PNG) puts that same list under a numbered grid with a symbol in every square.
Artkal bead pattern maker features
175 S codes, 173 shades
Matching runs over the solid colors of Artkal's 5 mm hard bead, S01 White through SE17. Each is shown by its code, and by name where one exists.
Matching by how colors look
More than twenty S colors have Blue in their name, and going by raw RGB numbers would often pick the wrong one. The tool measures difference the way eyes do, with the CIEDE2000 formula.
A cap of up to 40 colors
Give Most colors a number and the tool first finds that many shades that sum up the picture, then takes the closest Artkal bead to each. A small detail such as an eye keeps a color to itself.
Dithering between close shades
Neighboring Artkal colors sit near each other, so a dithered mix of two reads as a gentle step. Tick Dithering for skies, skin and soft shadows.
List sorted by quantity
The color you need most heads the list and the one you need least ends it, which makes it quick to see what deserves a bag of 6,000 and what a bag of 1,000 will cover.
Lines for 14.5 cm boards
Artkal's large square pegboard for 5 mm beads is 14.5 cm across, or 29 beads. Pegboard lines (29 x 29) rules the preview at that spacing, and the printed sheet has the same lines.
What are Artkal beads?
Artkal is a fuse bead brand from China. Its makers began in 2008 as a craft company called Xize Craft, and in 2011 they set up Ukenn Culture to produce Artkal beads themselves. From 2015 the range was widened with adult pixel artists in mind, growing from about 70 colors to more than 200. That range is the reason people who bead portraits and detailed scenes often pick Artkal.
The beads come in lettered series. S is the 5 mm hard bead, the one this tool matches to. R is a 5 mm soft bead that bends and springs back. C and A are the 2.6 mm mini versions, hard and soft, and X is a 10 mm bead for young children. A color's code is the series letter plus a number, so S13 is Black in the S series. Whatever the series, the beads go on a pegboard and are ironed through paper or film until they join.
Artkal bead series compared
Artkal describes its hard beads as very hard but not fragile and its soft beads as flexible, and suggests the soft ones for bracelets. A second mini board with 52 x 52 pegs is also sold. It does not link to the 50 x 50 board.
| Series | Bead size | Type | Large square pegboard |
|---|---|---|---|
| S | 5 mm midi | Hard | 14.5 cm square, linkable |
| R | 5 mm midi | Soft | Shares the S boards |
| C | 2.6 mm mini | Hard | 14.5 cm square, 50 x 50 pegs |
| A | 2.6 mm mini | Soft | Shares the C boards |
More pattern tools
Perler Bead Pattern Maker
Turn a picture into a Perler pattern with a bead count.
Hama Bead Pattern Maker
Turn a picture into a Hama pattern with a bead count.
Kandi Pattern Maker
Turn a picture into a kandi cuff pattern for pony beads.
Pony Bead Pattern Maker
Pony bead patterns for bead animals, key chains and banners.
Bead Loom Pattern Maker
Turn a picture into a loom pattern for seed beads.
Peyote Pattern Maker
Peyote stitch patterns with offset columns.
Brick Stitch Pattern Maker
Brick stitch patterns with offset rows.
Alpha Pattern Generator
Alpha friendship bracelet patterns from pictures.
Perler Bead Letters
Type a name and get a bead letter pattern.
Artkal bead pattern maker: common questions
What is the difference between Artkal S and R beads?
Both are 5 mm and go on the same pegboards. S beads are hard and R beads are soft: Artkal says a soft bead bends and returns to its shape, and recommends it for things like bracelets. This tool matches to the S chart. R has a chart of its own, so check each color against it before you order R beads.
Which Artkal colors does the tool leave out?
It works from 175 solid S codes: S01 to S159 without S63 Metallic Gold, plus SE01 to SE17. S94 Warm Blush and S155 Sunkissed Teint are never picked, because the color data gives them the same values as S18 Sand and S82 Clay. Glow, glitter, neon, pearl and translucent beads are not included, since a single flat color value can't stand for them. SE16 and SE17 appear by code alone, because no English name was found for either.
How many Artkal colors does a portrait need?
Start Most colors at 16 and step it up while watching the face, since skin and hair want more shades than a cartoon does. Any removes the cap. On the sample picture at 116 beads wide, Any used 51 Artkal colors, and 80 with Dithering ticked, some of them for only a few beads. Set a number when you dither, or expect a long order.
Which Artkal colors are used for skin tones?
The S chart has a run of them, including S93 Pale Skin, S154 Sahara Sand, S67 Vanilla, S68 Tan, S81 Deer and S82 Clay, with browns such as S148 Mocha for darker skin and shadow. You don't pick them yourself. The tool assigns whichever is nearest to each part of the face. Compare the listed beads with the photo before ordering, because skin is where a wrong shade shows first.
Why is a flat area speckled with two similar Artkal shades?
The area isn't quite flat in the picture. JPEG compression and soft lighting leave small differences, and with Artkal shades so close together those differences can land on two beads, say S06 Raspberry Pink and S25 Hot Pink. Lower Most colors until one of the pair drops out, and check that Dithering is unticked, because dithering adds speckle on purpose.
How hot should the iron be for Artkal beads?
Artkal gives a figure: medium heat, between 160 and 180 °C. Cover the beads completely with ironing paper or ironing film first, and have an adult do the ironing. Artkal's steps then have you peel the paper, turn the piece over and iron the other face, and finally let it cool under a book or another weight so that it stays flat.
What is the tape method that Artkal describes?
It is a way to iron without the pegboard, which heat can warp. Put a stiff board under the pegboards while you build. When the design is done, cover it with masking tape and press the tape onto the beads, turn the whole stack over, and lift the pegboards away. The beads now hang on the tape, and you iron the bare side.
Do Artkal S beads fit Perler and Hama pegboards?
Artkal sells S beads as compatible with both brands. Its own large square board is 14.5 cm across, the same as 29 beads at 5 mm, which is the layout of Perler's and Hama's large square boards and the reason the lines here fall every 29 beads. The brands differ under the iron, so test a few beads before fusing a piece that mixes them.
How do Artkal colors compare with Perler and Hama colors?
Artkal fills gaps the other two leave. By the color values this site matches with, 27 of the 175 Artkal colors have nothing near them in Hama's Midi range, and 7 have nothing near them in Perler's. S13 Black is also listed as a deeper black than either brand's. To see the same picture in those ranges, open the Perler bead pattern maker or the Hama bead pattern maker.
Can I use the pattern with Artkal C mini beads?
Yes, as a grid. C beads are 2.6 mm, so the piece comes out at about half the size shown, and they use their own boards: the standard large square mini board has 50 pegs each way. Set Width in beads to 50 or 100 to fill one or two of them. C beads carry C codes, so look up each S color on Artkal's C chart before ordering.