Pixelandia

Kandi Pattern Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

Cuff stitch

Columns go around the wrist. Each layer sits half a bead off the last.

30 x 6
6
8
Options

How to make a kandi cuff pattern

  1. Start from a wide, low picture

    Press Choose picture, or drop or paste a picture on the preview. A cuff is a band, so the tool cuts the picture to a strip around its middle, as deep as Height in beads allows. A tall picture loses its top and bottom, and a very wide one loses its two ends.

  2. Choose the cuff stitch

    Cuff stitch has two buttons. Multi (peyote) staggers the columns for the classic woven cuff. Ladder draws a straight grid in which each column is one rung.

  3. Set the beads around your wrist

    Width in beads runs from 6 to 60 and opens at 30. In multi stitch it is the base row and moves two beads at a time, because the count has to be even. In ladder it is the number of rungs. Height in beads, from 2 to 30, is how far the cuff reaches up your arm, and it opens at 6. Colors, from 2 to 24, is how many bead colors you will need on the table.

  4. Print the sheet and string

    Download pattern (PNG) saves a sheet that names the stitch, repeats the base row and layer counts or the rung counts, and shows the chart with a letter in each bead above the bead list. Download picture (PNG) is the bare design, without letters or lines.

Kandi pattern maker features

Two cuff charts from one picture

Flip between Multi (peyote) and Ladder and the same picture is redrawn for that stitch. Every bead turns a quarter turn, so the tool converts both sliders to keep the cuff the size it was: 30 around and 6 deep in multi becomes 20 rungs of 9 beads in ladder, still 18.0 x 5.4 cm.

Pony beads lying the way they sit

In multi stitch the cord runs around the wrist, so a 9 x 6 mm bead shows 6 mm across and 9 mm up the arm. In a ladder rung it is turned: 9 mm around, 6 mm up. The chart cells take those shapes.

Base row and layers spelled out

A multi cuff 30 beads around and 5 chart rows deep is reported as a base row of 30 beads, strung in one go, and 9 layers in all: the base row, then 8 layers of 15 beads. A ladder cuff lists its rungs and the beads on each.

Even counts only in multi stitch

While Multi (peyote) is selected, Width in beads stops on even numbers alone. Ladder takes odd ones too, since a chain of rungs closes on any count. Switch back from Ladder and the converted width is rounded to an even number.

Around the wrist, then up the arm

Finished size gives two numbers. The first is the distance around the cuff and the second is how far it reaches up your arm.

A shopping list of beads

Pony beads to use lists each color with its hex code and bead count, the most used first, under the total for the whole cuff.

What is a kandi cuff?

Kandi is jewelry made of plastic pony beads on elastic string. It goes back to the Southern California rave scene of the early 1990s. Bracelets are traded with the PLUR handshake: peace, love, unity, respect, and the bracelet slides from one wrist to the other on the last word. A single is one strand of beads. A cuff is several rows joined into a wide band.

The usual cuff is multi stitch, which bead weavers know as even-count peyote worked in a ring. The base row is a single. Every layer after it has half as many beads, each one dropped into a gap, so neighboring columns sit half a bead apart. A ladder cuff is a chain of short rungs instead, and its beads line up in a plain grid. For flat pieces strung row by row, such as bead animals, use the pony bead pattern maker.

Kandi cuff sizes in beads

These are the sizes the tool gives for a standard 9 x 6 mm pony bead. Elastic string and your own tension move them a little, so string a single and try it on before you commit to a count.

Distance around a kandi cuff for each base row count
Multi stitch base rowAround the wristLadder rungs for the same fit
26 beads15.6 cm (6.1 in)17
28 beads16.8 cm (6.6 in)19
30 beads18.0 cm (7.1 in)20
32 beads19.2 cm (7.6 in)21
34 beads20.4 cm (8.0 in)23
36 beads21.6 cm (8.5 in)24

More pattern tools

Kandi cuff questions

How many beads go around a kandi cuff?

Kandi Patterns builds its example cuff on a base of 30 pony beads, and its X-base tutorial calls 32 a small to medium wrist. Wrists differ, so string a single, pull it over your hand and count what fits. Then set Width in beads to that number, rounded to an even one for multi stitch.

Why does multi stitch need an even number of beads?

After the base row, each layer puts one bead into every second gap, so it holds exactly half the base count. With an odd base the last gap of the ring has no partner and the layer cannot close. That is why Width in beads moves in twos for as long as Multi (peyote) is selected.

What is the difference between a multi stitch and a ladder cuff?

In multi stitch one cord travels around the wrist layer after layer and the beads interlock, so the columns end up staggered. A ladder cuff is made rung by rung: a few beads strung across the cuff, with both cord ends passing through them in opposite directions. Its beads stack in straight lines, and its chart is a plain grid like graph paper.

How do I read the multi stitch chart?

Kandi makers usually build upward, so take the bottom chart row as the base row: string all of its beads left to right and tie them in a ring. For the next layer, add a bead, skip a bead, and go through the one after. Each chart row above is two layers, first the beads that sit lower, then the ones between them.

Why does my lettering come out backwards?

A ring of beads has no front, so the first layers can settle either way round. Hold the cuff against the chart after the third layer. If the picture is mirrored, turn the cuff inside out while it is still shallow. Pony beads look the same from both faces, and the design then reads the right way. Hearts, stripes and other symmetrical designs are not affected.

How do I follow the ladder chart?

Each column is a rung. Slide its beads onto one end of the cord from the top of the column down, then pass the other end through the same beads the opposite way and pull both ends until the rung sits against the last one. To close the cuff, take one end through the first rung again and knot the two ends together.

How many layers should a kandi cuff have?

There is no rule. The example pattern in Kandi Patterns' reading guide has 11 layers. In the tool that is 6 chart rows, since the Layers line counts two for each chart row less one, and it comes to about 5.4 cm. The second number in Finished size is the height.

Why is the top and bottom of my picture missing?

A cuff is a strip and most pictures are not. The tool fits the picture to the full width and keeps the band through its middle that Height in beads has room for. Raise Height in beads to take in more, or start from a picture cropped wide and low. A multi cuff 30 beads around and 6 deep shows all of a picture a little over three times as wide as it is tall.

How much string does a kandi cuff take?

Kandi Pad's rule is to wrap the elastic around your wrist once for every row of the cuff, then cut one and a half to two times that length. A 9 layer cuff means 14 to 18 wraps. If the string runs out anyway, knot a new piece on and carry on.

Which pony bead colors does the pattern use?

None by name. The tool takes its colors from your picture, as many as Colors allows, and lists each as a swatch with a hex code. Pony beads come in different shades from every maker, so lay your beads beside the screen and pick the nearest one for each swatch.

Can I use the multi chart for a kandi mask or a flat panel?

Yes, as long as the width is even. Kandi masks, bandanas, ties and flat panels are peyote stitch too, worked back and forth instead of around. Read Base row as the first strand strung and the layers as rows of half that many beads. The finished size still holds, because the beads sit the same way.

Does it chart X-base or 3D cuffs?

No. An X-base cuff is strung three beads at a time between connector beads, and Kandi Patterns sizes it in steps of four beads. A 3D cuff is built up from that same base. Neither puts one bead in each square of a flat grid, so a picture cannot be mapped onto them here.