Pixelandia

Perler Bead Pattern Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

29 x 29
16
Options

How to make a Perler bead pattern from a picture

  1. Bring in a picture

    Start from Choose picture, or skip the button: a file dragged onto the preview loads too, and so does a copied image when you paste. Until then, a sample strawberry shows what a finished pattern looks like.

  2. Match it to your pegboards

    Slide Width in beads. At 29 the design is exactly one large square Perler pegboard wide. The second number beside the slider is the height, worked out from the shape of your picture.

  3. Trim the colors to the bags you have

    Most colors opens at 16. Slide it down until the list under the preview is a set of Perler colors you own or are happy to buy. All the way left is Any, which lifts the limit.

  4. Save the sheet

    Press Download pattern (PNG) for a printable grid. Every bead carries the symbol of its color, and the key below the grid gives each Perler color's number, name and count.

What the Perler bead pattern maker gives you

117 Perler colors, by number

Each bead in the pattern is one of 117 Perler colors, from P01 White to P961 Cherry, listed by P number and Perler's own color name.

A count for every color

Perler beads to use runs from the most used color to the least, each with its bead count, so you can spot the ones that need more than a single bag of 1,000.

Pegboard lines every 29 beads

Pegboard lines (29 x 29) draws a heavier line wherever one large square board ends. The summary above the list counts the boards with at least one bead on them, so a corner the design never reaches doesn't add a board.

Finished size at 5 mm a bead

The tool multiplies the grid by 5 mm and gives the size of the ironed piece in centimeters and inches, on the page and again on the printed sheet.

Background left empty

Remove background starts ticked. It clears the plain color that runs in from the edges, so a character drawn on a white page becomes a cut-out shape and not a square full of white beads.

Bead look or flat squares

Bead look draws every bead as a ring with a hole, the way the design sits on the board before the iron. Untick it for flat squares, closer to a piece fused until the holes close.

Two files to save

Download pattern (PNG) is the working sheet. Download picture (PNG) is the design alone, with no lines or symbols, and the empty pegs left see-through.

What are Perler beads?

Perler beads are short plastic tubes that stand on a pegboard, one bead to a peg. The brand started in California in 1981. A standard bead is about 5 mm across (Perler gives 5.07 mm high by 4.77 mm wide) and is made of low-density polyethylene, a plastic that softens under a household iron. Under ironing paper and a warm iron, each bead welds to the ones beside it and the design becomes one stiff piece.

Because a peg holds a single color, a Perler design is pixel art you can pick up. Game sprites, emoji and logos are the usual subjects, and any other picture must first be cut down to a grid and a short list of colors, which is the job of this tool. Perler also makes Mini beads, about 2.6 mm wide, and Biggie beads for small children. For a name or a word, Perler bead letters lays out the letters for you.

Perler pegboard sizes and pattern widths

Perler's large square pegboard is 5.7 inches across, with 29 rows of 29 pegs. The boards snap together along their edges, so a wider pattern goes up one board at a time. The last column is the bead count when every peg is filled.

Pattern widths in Perler pegboards
Width in beadsBoards acrossFinished widthIn inchesPegs in a full square
29 beads114.5 cm5.7 in841
58 beads229 cm11.4 in3,364
87 beads343.5 cm17.1 in7,569
116 beads458 cm22.8 in13,456

More pattern tools

Perler bead pattern maker questions

How many Perler beads does a pattern need?

That depends on how much of the grid the picture fills. A full 29 x 29 board is 841 beads, yet the sample strawberry at that size takes only 287, because its background stays empty. The list under the preview gives the exact count for each color and the total. Perler sells single colors in bags of 1,000 and 6,000.

Which Perler colors can the pattern include?

The 117 colors in the tool's Perler chart. Most are solid colors. The chart also holds five Pearl shades, Gold, Silver, Glow Green and the neons, and those are matched by their flat color alone. If a pearl or glow bead would look wrong in your piece, swap it for the nearest solid color when you shop. Striped, glitter and clear beads are not in the chart.

The pattern lists a Perler color I don't own. What can I do?

There is no switch to block a single color. Lower Most colors and the pattern is rebuilt from fewer shades that differ more from each other, which often drops the odd one out. If a color covers only a handful of beads, look at its swatch in the list and place the closest bead you have in its spots.

Can I turn a photo of a pet or a person into Perler beads?

Yes, given enough beads. A face needs roughly 50 beads across before the eyes and mouth read clearly, so plan on two boards wide or more. Set Most colors near 40 or to Any, and tick Dithering, which speckles two bead colors together to stand in for shades Perler doesn't make. Crop the photo close to the face before loading it, since the tool has no crop.

Why do old game sprites make such clean Perler patterns?

A sprite is already a grid, so nothing has to be averaged. Set Width in beads to the sprite's width in pixels, 16 or 32 for many classic characters, and each pixel becomes one bead. Use the original image or a sharp enlargement of it, because a blurry screenshot adds in-between shades. Sprites also use few colors, which keeps the bead list short.

Should I iron Perler beads on one side or both?

Perler recommends both. Set a dry iron to medium with no steam, lay ironing paper over the board and move the iron in slow circles for 10 to 20 seconds, until the beads join but their centers are still open. Let it cool, lift the piece off, turn it over and repeat. Perler suggests giving the back a little longer and keeping the display side lightly fused.

Can I use parchment paper in place of Perler ironing paper?

Perler's advice is to always use its ironing paper, which comes in the pegboard packs and can be reused. Many crafters use plain baking parchment the same way. Whichever you choose, the iron should never touch the beads or the board directly, and the sheet should lie flat: Perler suggests ironing the creases out of it before you start.

How do I print the pattern at real size for a clear pegboard?

Perler's clear boards let you slide a pattern underneath and set the beads on top of it. For that, use Download picture (PNG), which is the grid alone with no margins. Print it so the width comes to 5 mm for every bead across, 14.5 cm for a 29-bead design. Keep the numbered pattern sheet next to you for the color names.

Will the pattern work with Perler Mini beads?

The grid will, since one square is one bead at any size. Mini beads are about 2.6 mm wide, so the piece comes out at roughly half the size the tool states, and they need Perler's Mini pegboards, which standard beads don't fit. The board count and the heavier lines assume the standard 29 x 29 board, so ignore both when you work in Mini.

Can I mix Perler beads with Hama or Artkal beads?

All three make 5 mm beads that sit on the same pegs, but the plastics don't melt at the same rate, so a mixed piece can fuse unevenly. The colors differ too. By the color values this site matches with, about a third of Perler's colors have a close twin in Hama's range and about half in Artkal's. To plan in those colors from the start, use the Hama bead pattern maker or the Artkal bead pattern maker.

Why did part of my picture disappear from the pattern?

Remove background clears every area that touches the edge of the picture and is close to the edge's main color. A white character on a white page loses any white part that isn't closed off by an outline. Untick Remove background to bead the whole rectangle, or put the picture on a background color that appears nowhere in the subject before you load it.