Perler Bead Letters
Free. No watermark. No sign-up.
A second line goes under the first. Type <3 for a heart.
Beads and pegboards
27 x 9 beads, 193 in all, on 1 pegboard of 29 x 29. Finished size about 13.5 x 4.5 cm (5.3 x 1.8 in).
Ironed, this comes apart into 2 pieces. To join them, turn on the outline or the plate, or close the gap between letters.
- P18 Black117
- P80 Bright Green22
- P05 Red18
- P04 Orange18
- P03 Yellow18
How to make Perler bead letters
Type the name
Write it in Name or word. The beads appear on the board as you type, and a second line lands under the first.
Choose the letters and their colors
Letter style sets the shape and height. Letter colors gives each letter its own rainbow color, swaps between two colors, or keeps one color throughout.
Decide how it holds together
Outline round the letters wraps each one in a ring of beads, and Fill the gaps to make a plate turns the name into a solid rectangle. The note under the board says how many separate pieces you will lift off after ironing.
Count your beads and print
Beads and pegboards lists every color with its count. Download pattern (PNG) saves a numbered sheet with a symbol in each square and the same list.
Perler bead letters features
Five letter styles
Bold with strokes two beads thick, Square capitals 5 beads tall, Classic, Serif and Tall. Bold is the sturdiest once fused.
Real Perler colors
Letters, outline and plate each pick from 117 Perler colors, shown with their own names and P numbers.
A color per letter
Rainbow runs red, orange, yellow, bright green, light blue, purple and pink, then starts again on the eighth letter.
Pegboard count
The result says how many 29 x 29 boards the name covers, across and down, and heavier lines on the board show where they meet.
One piece or several
The tool checks which beads touch side to side and tells you if the name will come off the board as one piece.
Mirror the pattern
Flips the name left to right, for people who iron one face and show the other.
Every letter on one sheet
Every letter lays out the whole alphabet, numbers and punctuation in your style and colors, to print as a reference.
Bead picture
Download bead picture (PNG) saves the name as round beads on a clear background, for a label or a party invite.
What are Perler bead letters?
They are letters laid out bead by bead on a pegboard and ironed until the beads fuse. Standard Perler beads sit 5 mm apart, and the large square board has 29 pegs each way, 841 in all, and measures 14.5 cm (5.7 inches) across. Because the board is a grid, a letter is a block pattern: a capital in Bold is 7 beads tall, 3.5 cm once fused.
Names are a favorite use: door signs, desk plates, keychains, fridge magnets, cake toppers and gift tags. Letters differ from other bead patterns in two ways. They have a right way round, which matters when you flip the piece, and a row of them is long and thin, which makes it likely to bend. For a bead pattern from a photo or a drawing, there is the Perler bead pattern maker.
Perler bead letter sizes
Heights are for capitals. The last column is how many capitals fit across one 29-peg board with one empty peg between them and no outline; M and W are wider and I is narrower.
| Letter style | Capital height | Fused height | Capitals per board |
|---|---|---|---|
| Square | 5 beads | 2.5 cm (1 in) | 5 |
| Classic | 7 beads | 3.5 cm (1.4 in) | 5 |
| Bold | 7 beads | 3.5 cm (1.4 in) | 4 |
| Serif | 9 beads | 4.5 cm (1.8 in) | 3 |
| Tall | 11 beads | 5.5 cm (2.2 in) | 5 |
More pattern tools
Perler Bead Pattern Maker
Turn a picture into a Perler pattern with a bead count.
Hama Bead Pattern Maker
Turn a picture into a Hama pattern with a bead count.
Artkal Bead Pattern Maker
Turn a picture into an Artkal pattern with a bead count.
Kandi Pattern Maker
Turn a picture into a kandi cuff pattern for pony beads.
Pony Bead Pattern Maker
Pony bead patterns for bead animals, key chains and banners.
Bead Loom Pattern Maker
Turn a picture into a loom pattern for seed beads.
Peyote Pattern Maker
Peyote stitch patterns with offset columns.
Brick Stitch Pattern Maker
Brick stitch patterns with offset rows.
Alpha Pattern Generator
Alpha friendship bracelet patterns from pictures.
Perler bead letters FAQ
How many beads does a name take?
A Bold capital uses between 18 beads, for I or L, and 36, for M. Square capitals take 9 to 18. An outline often needs more beads than the letters do: LILY in Bold is 76 letter beads plus 117 outline beads, 193 in all. Beads and pegboards gives the exact count of each color for your name.
How many pegboards do I need for a name?
One 29 x 29 board holds about four Bold capitals side by side, or five in Square, Classic or Tall. An outline adds 2 beads to the width, and that can tip a four-letter name onto a second board. The tool shows the boards across and down, and reducing Empty pegs between letters to 0 will sometimes save a board.
How do I join pegboards for a long name?
Perler's interlocking large square boards have notches along the sides that clip one board to the next. Join them in a row on a hard, flat table before you place a bead. On the downloaded pattern a heavier line falls every 29 beads, so you can see which letters cross from one board to the next.
How do I iron a long name so it doesn't bend?
Cover it with ironing paper and move a medium-hot iron in slow circles, working along the name so every part gets about the same 10 to 20 seconds. Flip it, fuse the back too, then let it cool under a heavy book. A strip that is heated on one face only, or cools in open air, curls.
Will the letters stay joined as one piece?
Only if they touch. Beads fuse to the beads beside, above and below them, and barely at all corner to corner. Separate letters come off the board separately, which is fine for fridge magnets. For a name in one piece, switch on the outline or the plate and read the note under the board, which counts the pieces.
When should I mirror the pattern?
When the side you iron is not the side you want to show. Ironing flattens the beads and narrows their holes, and many people prefer the untouched face with its round, open beads. Seen from that face, letters built the normal way read backwards. Tick Mirror the pattern, build what you see, iron the top and turn it over.
What is the smallest letter I can make?
Square capitals are 5 beads tall and 5 wide, about 2.5 cm once fused, and that is close to the limit for letters that still read clearly. Small letters with tails, such as g and y, need 9 rows in Classic or Bold. For anything smaller, write in capitals or switch to mini beads.
Which letters break most easily?
Letters with slanted strokes one bead thick. In Classic and Tall, the diagonals of K, M, N, V, W, X and Y are beads that meet only at their corners, and those joins snap first. Bold fixes that with strokes two beads thick, and an outline or a plate behind any style holds every bead on four sides.
Can I make the name with mini beads?
The pattern works bead for bead. Mini beads are 2.6 mm across, so the name comes out at about half the size given here, which is for 5 mm beads. The pegboard count on this page is for the 29 x 29 board for standard beads, so count the pegs on your mini board and divide for yourself.
How do I turn a name into a keychain or a door sign?
For a keychain, keep it short, use Square, and turn on the plate so there is a solid edge. Iron lightly enough that the holes stay open and put the ring through a corner bead. For a door sign, use Bold with an outline, and hang it from ribbon threaded through two top beads or fix it with adhesive strips.
How do I read the pattern sheet?
Each color has a symbol, shown in every square of that color and again in the key under the grid with its Perler name and bead count. Rows and columns are numbered at 1, 5, 10 and so on. Work one color at a time, or one row at a time from the top, whichever you find easier to follow.