Bead Loom Pattern Maker
Free. No watermark. No sign-up.
Or drop a picture on the preview, or paste one.
How to make a bead loom pattern
Bring in the picture
Use Choose picture, or drag a file onto the preview. Pasting a copied image works as well. The chart's width runs across the warp threads and its rows run along them, so a bracelet needs a tall, narrow picture and a wall piece can be any shape.
Say which beads are on your loom
Under Beads, press Delica 11/0, Round 11/0 or Round 8/0. A line below the buttons gives that bead's width and height as it lies on the loom, and the chart is redrawn in those proportions.
Set the beads across
Width in beads goes from 5 to 120 and starts at 40. The box above it answers at once with Warp threads and Rows. Colors, 2 to 24, starts at 10.
Download, then warp the loom
Download pattern (PNG) saves the numbered chart with the warp and row counts printed under the title, so the sheet tells you how to string the loom before you weave the first row.
Bead loom pattern maker features
Warp threads counted
The tool adds one to the beads across and shows it as Warp threads: 41 for a piece 40 beads wide.
Three seed beads to choose from
Delica 11/0 cylinders and round beads in 11/0 and 8/0. Each is drawn as it sits in a woven row, from the sizes MIYUKI publishes.
Rows recounted for each bead
The sample picture at 40 beads across takes 32 rows of Delicas, 29 rows of round 11/0 and 28 rows of round 8/0, because the three beads have different proportions.
Woven size in centimeters and inches
Forty Delicas by 32 rows is about 5.2 by 5.1 cm. The same chart in round 8/0 beads is about 8.5 cm wide. Finished size changes as you switch beads.
Up to 120 beads across
That is about 16 cm of Delicas or 26 cm of round 8/0, enough for a tapestry if your loom is wide enough to hold 121 warps.
Heavy lines every 10 beads
The printed chart numbers the first and every fifth row and column and thickens every tenth line, which makes a long row easy to count onto the needle.
Beads to buy, color by color
Seed beads to use lists each color with its hex code and how many beads it needs. The sample comes to 1,280 beads.
Dithering for woven photographs
Dithering scatters two bead colors through each other to suggest a shade between them. It helps a portrait 100 beads wide. On a narrow band it just looks speckled.
How bead loom weaving works
A bead loom holds a set of warp threads tight and parallel. The beads sit in the spaces between them, so a piece always has one more warp than it has beads across. The weft thread carries the beads: you pick up a whole row on the needle, pass it under the warps, press the beads up so one pops into each space, then run the needle back through the same beads above the warps. Every row is locked in by two passes of thread.
Because the weft goes through each hole, the beads lie on their side in a straight grid with no stagger. That is the difference from off-loom stitches, and it is why loom charts look like graph paper. For a staggered chart, use the peyote pattern maker.
Seed bead sizes on a loom
These figures are from MIYUKI's own table and are approximate. A bead is as tall as its diameter in the woven row, and its width is 10 cm divided by the strand count.
| Bead | Row height | Beads per 10 cm across | Beads per gram |
|---|---|---|---|
| Delica 11/0 | 1.6 mm | 77 | 200 |
| Round 11/0 | 2.0 mm | 69 | 110 |
| Round 8/0 | 3.0 mm | 47 | 39 |
More pattern tools
Perler Bead Pattern Maker
Turn a picture into a Perler pattern with a bead count.
Hama Bead Pattern Maker
Turn a picture into a Hama pattern with a bead count.
Artkal Bead Pattern Maker
Turn a picture into an Artkal pattern with a bead count.
Kandi Pattern Maker
Turn a picture into a kandi cuff pattern for pony beads.
Pony Bead Pattern Maker
Pony bead patterns for bead animals, key chains and banners.
Peyote Pattern Maker
Peyote stitch patterns with offset columns.
Brick Stitch Pattern Maker
Brick stitch patterns with offset rows.
Alpha Pattern Generator
Alpha friendship bracelet patterns from pictures.
Perler Bead Letters
Type a name and get a bead letter pattern.
Bead loom pattern maker FAQ
How many warp threads does a bead loom pattern need?
One more than the number of beads in a row, because every bead needs a thread on both sides. A 7 bead band takes 8 warps and a 40 bead piece takes 41, the figure shown beside Warp threads. Fire Mountain Gems suggests doubling the two outside warps for strength. If you do, string two more threads than the tool says.
Should I weave with Delicas or round seed beads?
Delicas are cylinders and very even in size, so they pack into level rows and a picture comes out sharp. Round beads vary more from one to the next and give a softer, slightly uneven surface. Either works, but keep every color the same kind of bead, then choose that bead under Beads so the chart has its proportions.
How do I size a loom bracelet pattern?
The rows run along your wrist. A row of Delicas is 1.6 mm tall, so 100 rows weave about 16 cm of band, and 15 beads across is just under 2 cm wide. Use a tall, narrow picture and read the second number in Finished size as the length. The clasp adds its own length on top.
How many grams of seed beads will the pattern use?
Divide each count in the bead list by the beads per gram: about 200 for Delica 11/0, 110 for round 11/0 and 39 for round 8/0, by MIYUKI's figures. The 1,280 bead sample is roughly 6.4 grams of Delicas. Buy a little extra of each color, since MIYUKI calls its own counts approximate.
What thread should I warp a bead loom with?
Fire Mountain Gems names size D Nymo and FireLine as the most versatile warp threads for jewelry. Its advice is the heavier size D for bracelets and hatbands in size 11 or larger beads, which take wear, and the lighter size B for small pieces such as earrings in size 11 or 15 beads.
How do I finish the warp ends?
A standard way is to thread each warp end onto a short needle, weave it back into the beadwork over and under the weft threads, and trim it close. A 40 bead piece has 41 warps and so 82 ends, which is a good reason to keep a first bracelet narrow.
Which way do I read a loom chart?
Row by row from the top, and always from the same side. If your weft is tied to the left warp, pick up the beads of row 1 from left to right and weave them in. The needle comes back through the row, so row 2 starts from the left again. Numbers down the side of the sheet keep track of the row.
How wide a pattern can my loom take?
On a loom with a spring or a notched bar, count the coils or notches: you need one for each warp, so one more than the pattern's width. The tool allows 5 to 120 beads. Then compare the first number in Finished size with the weaving width of the loom, which matters most with the larger round 8/0 beads.
Can I stitch a loom chart in peyote or brick stitch?
Not as it is. Those stitches shift every other column or row by half a bead, so the squares of a straight chart have no matching beads. Convert the picture again with the peyote pattern maker or the brick stitch pattern maker, which draw the shift and size the beads the way each stitch turns them.
Are the colors on the chart real bead colors?
No. They are the colors that best cover your picture, each shown as a swatch with a hex code, up to the number set in Colors. Seed beads come in opaque, transparent, matte and lined finishes that a screen cannot show, so take the printed key to your bead box and match in daylight.
Can I weave a photograph on a bead loom?
Yes, if the piece is big enough to hold the detail. At the full 120 beads across, a square photo is 97 rows of Delicas, about 16 cm each way and 11,640 beads, close to 58 grams. Raise Colors toward 24 and tick Dithering so skin and sky shade gradually. At bracelet widths a photo loses its detail, and a drawing with flat colors weaves better.