Pixelandia

LEGO Mosaic Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

64 x 64
16
Options

How to plan a brick mosaic with the LEGO mosaic maker

  1. Add the picture

    Start with Choose picture, or drag an image onto the preview, or paste one from the clipboard. Strong shapes survive the trip to studs best: a face lit from one side, a pet against a plain wall, a logo.

  2. Choose the width in studs

    Width in studs moves from 16 to 192 and starts at 64, two baseplates across. Rows are added to keep the picture's shape, and both numbers show beside the slider.

  3. Limit the colors

    Most colors starts at 16 and goes up to all 46. Each color you allow is one more kind of 1x1 piece to track down, so try a low number before a high one.

  4. Download the plan

    Download pattern (PNG) saves the building plan: a symbol on every stud, a heavy line at each baseplate edge, and the colors with their quantities. Build it one baseplate at a time.

LEGO mosaic maker features

46 colors that exist as 1x1 pieces

The palette is the solid colors that appeared as a 1x1 plate or a 1x1 round plate in at least one set since 2024. Transparent, metallic, pearl, chrome and glow colors are left out.

A parts list by color

1x1 pieces to use names each color and the studs it fills, largest first, with the total above. One stud takes one piece, so the total is the quantity to order.

Baseplate lines and a baseplate count

Baseplate lines (32 x 32) rules a dark line every 32 studs, and the summary counts the 32 x 32 baseplates that hold at least one piece. When the picture would take fewer 48 x 48 baseplates, that number follows it.

Real size on the wall

Studs sit 8 mm apart, and the tool multiplies that out in centimeters and inches. The 64 by 64 mosaic it starts with is about 51 cm square.

Stud look

A ring is drawn on every square, so the preview reads as studded plates and not as flat pixels. Untick Stud look to see how a smooth, tiled finish would compare.

Matching built for a small palette

Each stud takes the brick color that scores closest under CIEDE2000, a color difference formula modeled on human vision. With only 46 colors to choose from, picking the right neighbor matters more than it does with hundreds.

A plan with coordinates

Rows and columns are numbered every 5 studs on the plan. A spot such as column 40, row 17 is quick to find again when you look up from the baseplate. Tick Symbols and the list on the page shows which symbol stands for which color.

What is a LEGO mosaic?

A LEGO mosaic is a picture built flat, one small piece to a stud, so that every piece acts as a pixel. The LEGO Group has sold the idea itself. Its Mosaic Maker set, number 40179, packs a gray 48 x 48 baseplate with 4,500 1x1 plates: 900 each in white, light gray, dark gray, black and yellow. The LEGO Art line, launched in August 2020, makes pictures 48 studs square on nine 16 x 16 panels and fills them with round 1x1 tiles or round 1x1 plates.

Builders who design their own mostly work on baseplates. Studs are spaced 8 mm apart, which makes a 32 x 32 baseplate 25.6 cm across and a 48 x 48 one 38.4 cm. For the same picture in fuse beads, the Perler bead pattern maker plans it on 29 x 29 pegboards.

LEGO mosaic sizes, pieces and baseplates

One 1x1 piece goes on every stud. Sizes are worked out at 8 mm a stud.

Square mosaic sizes with their measurement, 1x1 piece count and the baseplates they need
MosaicEach side1x1 piecesBaseplates
32 x 32 studs25.6 cm (10.1 in)1,024one 32 x 32
48 x 48 studs38.4 cm (15.1 in)2,304one 48 x 48
64 x 64 studs51.2 cm (20.2 in)4,096four 32 x 32
96 x 96 studs76.8 cm (30.2 in)9,216nine 32 x 32, or four 48 x 48
128 x 128 studs102.4 cm (40.3 in)16,384sixteen 32 x 32
192 x 192 studs153.6 cm (60.5 in)36,86436 of 32 x 32, or 16 of 48 x 48

The tool counts 32 x 32 baseplates first, and adds the 48 x 48 count whenever it is the lower one. At 48 studs wide it reads 4 baseplates of 32 x 32 or 1 of 48 x 48.

More pattern tools

LEGO mosaic maker FAQ

Should I build with 1x1 plates, round plates or tiles?

All four 1x1 parts fit the plan, since each fills one stud. Square plates (part 3024) cover the baseplate completely. Round plates (4073) leave gaps, so the baseplate's color becomes part of the picture. Tiles (3070) and round tiles (98138) give a smooth top with no studs. The palette here is built from plate and round plate colors, so check that a color exists before you settle on tiles.

How many studs wide does a portrait need to be?

LEGO's own portrait sets are 48 studs square, and that is a sensible floor for one face cropped tight: 2,304 pieces on a single 48 x 48 baseplate. At 64 studs, where the tool starts, eyes and a mouth get some shape, for 4,096 pieces. Under 32 studs there are too few pieces for a likeness.

Why do skin tones come out blotchy in a brick mosaic?

The palette takes big steps where a face takes small ones. Skin lands on a handful of the 46 colors, mainly Light Nougat, Tan, Warm Tan, Nougat and Medium Nougat, then jumps to Dark Orange and Reddish Brown. A cheek that shades gently in the photo turns into two or three hard bands. Dithering softens them. A grayscale photo avoids the problem, since it is built from Black, the two bluish grays, Light Aqua and White.

Can I use 48 x 48 baseplates or 16 x 16 plates instead of 32 x 32?

Yes. The plan is a plain stud grid and fits any base. The lines assume 32 x 32, the size LEGO sells in green, blue and white, and the summary gives the count for both sizes when 48 x 48 needs fewer. For the gray 48 x 48 baseplate, set the width to 48, 96 or 144 and untick Baseplate lines. With 16 x 16 plates, every 32-stud square on the plan is four of them.

Where do I buy a few thousand 1x1 plates?

LEGO's Pick a Brick service sells single parts, and the marketplaces BrickLink and BrickOwl list them from many independent sellers. Search by part number and color. The color names in the list follow Rebrickable's catalog, which differs from LEGO's own naming in places: Light Bluish Gray is Medium Stone Grey at LEGO, and Tan is Brick Yellow. Price the whole list before you commit, since stock varies by color.

Can I upload the parts list to BrickLink or Pick a Brick?

Not directly. The list appears on the page and on the plan, and there is no wanted-list file to export, so the quantities are typed in by hand. It also counts 1x1 pieces only. Some builders swap a run of one color for a 1x2 or longer plate to cut the piece count, and the tool doesn't work those out.

Why is a color I own missing from the palette?

The palette is kept on purpose to solid colors that Rebrickable's catalog shows as a 1x1 plate or 1x1 round plate in a set from 2024 onward, so the list sticks to pieces from recent sets. Transparent, chrome, pearl, metallic and glow colors are out. So are older colors that no longer turn up in those two parts.

Will the finished mosaic look like the preview?

In layout, exactly, because the plan is stud for stud. In color, nearly. Every brick color is shown as one catalog value, while real bricks vary a little between batches and shift under warm or cool light. Step back from the screen until the preview looks the size it would on your wall, and judge it from there.

When should I turn on Dithering for a mosaic?

Turn it on for photos with gradual shading, such as faces and skies. It mixes two neighboring colors stud by stud, and from a few steps back the mix reads as a shade the palette doesn't have. Leave it off for logos, lettering and cartoon art, where flat areas should stay flat. A dithered plan has few long runs of one color, so it is slower to build.

How do I hang a finished mosaic?

The 1x1 pieces grip the studs and stay on without glue. The baseplate is the weak part: it is thin, it bends, and several laid side by side have nothing joining them. Fix the baseplates to a rigid board first, with strong double-sided tape or adhesive strips, then frame the board or hang it.

Is this an official LEGO product?

No. Pixelandia is an independent site. It is not made, sponsored or endorsed by the LEGO Group, which owns the LEGO trademark. The tool names LEGO colors and part numbers only so that you know which pieces to look for when you buy.