Pixelandia

Sprite Maker

Free. No watermark. No sign-up.

Frames

Frame 1 of 1

#DC2626
Drawing options
Animation
8 fps
Download

How to animate a sprite frame by frame

  1. Set Width and Height

    They are two separate lists of 8, 16, 24, 32, 48 and 64 pixels, so a tall character can be 16 wide and 32 high. All frames share that one size.

  2. Draw the first pose

    Pencil, Eraser, Fill and Color picker sit above the canvas. For a character seen from the front, tick Mirror left and right, draw one half and the other half follows.

  3. Duplicate, then move a few pixels

    Press Duplicate for a copy of the open frame and change only what moves. Onion skin leaves the earlier frame showing through faintly, so you can count how far an arm or a foot has travelled.

  4. Watch the loop and export

    The preview next to the Stop button loops the frames. Drag Speed until the motion looks right, choose a Sheet layout and a Scale, and press Download sprite sheet (PNG), Download GIF or Download frames (ZIP).

What the sprite maker gives you

A frame strip with 64 slots

Add frame puts a blank frame after the open one, and Delete removes the open one. Move left and Move right shift it along the strip, or drag one thumbnail onto another with a mouse. The left and right arrow keys step between frames.

Onion skin of the frame before

The earlier frame is painted at 30% strength under the open one. It appears on the drawing canvas only, never in a download, and frame 1 has nothing behind it.

A preview that plays while you draw

It loops at 1 to 30 frames per second and shows each pixel as soon as you place it. Stop holds it on the open frame.

Strip or block

One row sets the frames side by side as a strip. Grid packs them into a block as near to square as the count allows, read left to right and then down. Frames touch, and cells with no frame stay clear.

One Scale for all three downloads

1x, 2x, 4x, 8x or 16x applies to the sheet, the GIF and the ZIP alike. Each sprite pixel is saved as a solid block, so a 32 x 32 frame at 4x measures 128 x 128.

GIF timing that adds up

A GIF counts time in hundredths of a second, and 8 fps needs twelve and a half. The tool alternates frames of 130 and 120 milliseconds, so the GIF's loop is as long as the preview's.

Undo for frames, not only pixels

Undo and Redo hold 100 steps. A deleted frame, a reorder, a change of size, Clear frame and New sprite all come back with Ctrl+Z.

What is a sprite?

In a game, a sprite is a picture that moves on its own over the background: the player, an enemy, a coin. The word comes from Texas Instruments. The team behind the TMS9918 video chip of 1979 used it for the small pictures that the chip drew over the background, and Karl Guttag, who helped design the chip, credits the name to a TI manager, David Ackley.

An animated sprite is a stack of frames of one size, shown in turn. Animators build a walk from four poses for each step: contact, down, passing and up. A full cycle is two steps, so eight frames, and small game characters often manage with four.

Sprite sizes and limits on four classic consoles

Old consoles drew sprites with their own circuitry and capped how many could appear. Past the limit for one line of the screen, the extra sprites were not drawn, which is where the flicker in crowded NES games comes from. Width and Height on this page cover the same span, 8 to 64 pixels.

Sprite sizes and how many sprites four consoles could show
ConsoleSprite sizesOn screenOn one line
NES8 x 8 or 8 x 16648
Game Boy8 x 8 or 8 x 164010
Super Nintendo8 x 8 up to 64 x 6412832
Sega Genesis, 320-pixel mode8 x 8 up to 32 x 328020

A character larger than one sprite was made of several placed edge to edge.

More pattern tools

Sprite maker questions

How many frames does a walk cycle need?

Four is the practical minimum: a contact pose and a passing pose for each leg. Eight adds the down and up poses between them and is the usual count once a character is big enough to show the body bobbing. Draw the two contact poses first, because they set the length of the stride, then put the others between them with Add frame.

What frame rate should a sprite animation play at?

Lower than video. Hand-drawn film animation is often shot on twos, which means 12 drawings a second at 24 frames per second, and sprite animation sits around that figure or under it. Speed starts at 8 fps. Raise it for a run, lower it for a slow loop such as breathing.

How do I hold one frame longer than the others?

Every frame lasts the same time, one tick of Speed. To hold a pose, open it and press Duplicate: two identical frames in a row keep it up twice as long. Some pixel artists hold the contact poses of a walk this way. Each copy counts toward the 64 frames and takes a cell of its own on the sheet.

What size should a game sprite be?

Settle the tile size of the game first. Characters are commonly one tile wide and one or two tiles high. On 16-pixel tiles that gives 16 x 16 or 16 x 32, the frame Stardew Valley uses for its villagers. Leave clear pixels around a pose that jumps or swings a weapon, because a frame can't grow for one pose only.

Why does my character jitter when the animation plays?

Usually a part that should hold still has moved by a pixel. With Onion skin on, compare the feet and the top of the head with the frame before: in a standing pose they should cover the faint copy exactly. Make each new frame with Duplicate so the parts you don't touch stay put.

Should I export One row or Grid?

One row is the easiest to describe to a game engine: a frame size and a count. It gets wide fast: 24 frames of 64 pixels at 4x come to 6,144 pixels across. Grid keeps both sides short: 10 frames make 4 columns and 3 rows, with 2 clear cells at the end. A sheet over 16,384 pixels on a side is refused, with a note to lower Scale or switch to Grid.

Sprite sheet, GIF or ZIP: which download is for what?

The sheet is for game engines, which cut it into frames by size. The GIF is for showing people: it plays by itself in chats, forums and web pages. The ZIP holds each frame as a numbered PNG, named like sprite-32x32-01.png, for video editors and for engines that import frames one file at a time.

Will the GIF have a transparent background?

Yes. Pixels you never colored are clear in the GIF, the sheet and the separate frames. Each GIF frame is wiped before the next is drawn, so a moving arm leaves no trail. The format holds 256 colors and one goes to the clear pixels, so a sprite with up to 255 colors keeps every one exactly. Past that, the closest colors are merged.

Can I open an existing sprite sheet or GIF and edit it?

No. The sprite maker starts from a blank canvas and has no import. It is for drawing new frames. To get the frames out of a sheet you already have, or to turn one into a GIF, use the sprite sheet cutter.

Does the animation survive closing the tab?

Yes. A moment after each change, all the frames and the Speed setting are saved, and they load again on your next visit with the same browser. One sprite is kept at a time, so New sprite replaces it, and Undo history starts empty after a reload. If a sprite is too large to keep, a note under the frame strip says so and asks you to download it.

Can I draw a sprite at a size that isn't on the list, such as 20 x 20?

Not exactly. Width and Height each offer 8, 16, 24, 32, 48 and 64 pixels. Choose the next size up, here 24 x 24, and leave the spare rows and columns clear. If you change either one partway through, all frames change together and keep their pixels measured from the top left corner. A larger size adds room on the right and at the bottom. A smaller one trims those two sides.