Pixelandia

QR Code Pattern Maker

Free. No watermark. No sign-up.

Make it as
Error correction
4 squares

Beads to use

Version 2 QR code, 25 x 25 squares, plus 4 on each side for the quiet zone: 33 x 33 beads.

4 pegboards of 29 x 29 (2 x 2).

Finished size: about 17 x 17 cm (6.5 x 6.5 in)

  • P01 White774
  • P18 Black315

1,089 beads in all.

How to make a QR code pattern

  1. Enter the link

    Type or paste it into Link or text. The code is rebuilt on every keystroke, and the line under the preview names its version and size, such as Version 2 QR code, 25 x 25 squares.

  2. Pick the craft and its two colors

    Make it as has three choices. Perler beads offers Dark beads and Light beads from the Perler list. Cross stitch offers Dark floss in DMC numbers and a Fabric count. Pixel art has two color pickers, Dark color and Light color.

  3. Set the border, then download and scan

    Choose an Error correction level, and leave Quiet zone (blank border) ticked or narrow Quiet zone width from 4 squares to as few as 1. Download picture (PNG) gives the bare code: point a phone at it on screen to prove the link works. Download pattern (PNG) is the numbered chart you build from.

What the QR code pattern maker works out

The smallest code that holds your text

QR codes come in 40 sizes. The maker always uses the lowest one that fits your text at the chosen error correction level.

Compact storage for digits and capitals

Text that is all digits, or all capitals, digits, spaces and $ % * + - . / : is packed more tightly than other text. Typed in capitals at level L, HTTPS://PIXELANDIA.APP fits a 21 x 21 code. In lower case it needs 25 x 25.

Pegboards counted for you

For Perler beads the list gives the beads of each color, the number of 29 x 29 pegboards and the finished size at 5 mm a bead. Pegboard lines marks where one board ends and the next begins.

Fabric as the light color

A cross stitch code starts with only the dark squares stitched, and the list counts the squares left as bare fabric. Tick Stitch the light squares too to choose a Light floss. Fabric sets 11, 14, 16 or 18-count Aida for the finished size.

Warnings before you start

An amber note appears when the dark color is lighter than the light one, when the two are under a 3 to 1 contrast ratio, and when the code passes 58 beads or 100 stitches across.

A chart that records what it encodes

The pattern sheet prints the version, the error correction level, the quiet zone and the start of the text under the title, then the grid with a symbol in each colored square, numbers every 5 and a heavy line every 29 squares for beads or every 10 otherwise.

What is inside a QR code?

A QR code is a square of dark and light cells called modules. Denso Wave introduced it in 1994, and its layout is fixed by the standard ISO/IEC 18004, which is why a code made of beads is read by the same phones as a printed one.

Not every module is data. Three corners hold finder patterns, each 7 modules square, whose dark and light bands have widths in the ratio 1:1:3:1:1 along any line through the middle. A scanner looks for that ratio to find the code and tell which way up it is. Dotted timing lines join the finders, and from version 2 up smaller 5 x 5 alignment squares appear, the first near the fourth corner. The remaining modules carry your text and the error correction that repairs misread parts.

Version 1 is 21 modules on a side. Each version adds 4, up to 177 at version 40.

QR code versions, pattern sizes and pegboards

The characters column is for ordinary text such as a web address in lower case, at level M. The pattern size includes the full 4-square quiet zone.

QR code versions 1 to 7 and 10 with their size in squares, pegboards needed and capacity
VersionCodePattern with quiet zone29 x 29 pegboardsCharacters at level M
121 x 2129 x 29114
225 x 2533 x 33426
329 x 2937 x 37442
433 x 3341 x 41462
537 x 3745 x 45484
641 x 4149 x 494106
745 x 4553 x 534122
1057 x 5765 x 659213

More pattern tools

QR code pattern FAQ

Will a QR code made of beads really scan?

Yes, when the pattern is followed exactly and the two colors differ enough. A scanner sorts what it sees into dark and light, then checks a small spot at the center of each module. A bead has its hole right there, showing whatever lies under it, so an unfused code can fail up close. Ironing shrinks the holes, and from a little further back they blur into the bead.

How short must a link be to fit one pegboard?

With the full quiet zone only version 1 fits a 29 x 29 board, and it holds 14 characters of ordinary text at level M or 17 at level L. Narrow Quiet zone width to 2 and version 2 fits as well, at 25 + 4 squares, which raises the limits to 26 and 32.

Is it safe to type my link in capitals to shrink the code?

For the https and the domain name, yes. Those mean the same in any case, so HTTPS://EXAMPLE.COM opens the same site. Whatever follows the domain can be case-sensitive, and many servers treat /Shop and /shop as two pages. Scan the test picture and open the link before you place a bead.

Which error correction level suits a handmade code?

M, the level it opens on. Each step up lets a scanner rebuild more of a damaged code, about 7%, 15%, 25% and 30% for L, M, Q and H, and each step can push the code up a version. The sample link is 25 x 25 at L and M and 29 x 29 at Q and H: 1,089 beads against 1,369 with the border.

Does error correction cover a bead in the wrong place?

In the data area, usually. A wrong bead there is one misread module, and the correction data can repair a limited number of those. It does not protect the three corner squares or the dotted lines between them, which hold no data. A scanner that can't recognize those never gets as far as reading the rest, so check them bead by bead.

Can I leave out the quiet zone to save beads?

The standard asks for 4 modules of light margin on every side, so a scanner can tell where the code ends. What matters is that the margin is there, not that it is made of beads. A borderless piece on a white wall or a pale card mount has its margin. The same piece on dark wood or a patterned cloth may not be found at all.

Which side of a fused bead code should face out?

The side that faced you on the pegboard. Seen from the back, the code is a mirror image. Reading mirrored codes was added to the standard in 2006 as an optional feature, so some scanners manage it and others don't. If you like the flat ironed look on show, iron the top face and leave the underside as the back.

Does the code have to be black and white?

No, but the dark squares must stay clearly darker than the light ones. Navy on cream is fine. Two mid-tones, such as red on blue, are not. The maker measures the two colors and warns below a 3 to 1 contrast ratio. Light squares on a dark ground are also optional for scanners to support, so keep dark on light.

What fabric suits a cross stitched QR code?

White or cream Aida, with the light squares left unstitched so the cloth supplies the contrast. The count sets the size: the sample code is 33 stitches across with its border, which is 3.0 inches on 11-count and 2.4 inches on 14-count. On dark or colored fabric, stitch the light squares too and pick a pale floss.

Is this a static or a dynamic QR code?

Static. The squares spell out your text and nothing else, so there is no redirect and nothing that can lapse. A dynamic code from a marketing service holds a short address that the service forwards, and it stops working if the service does. A static code lasts as long as the page it names.

Can it make a Wi-Fi code?

It encodes whatever you type, exactly as typed, and has no form for network details. Phones recognize certain text layouts, though. A network login is written WIFI:T:WPA;S:name;P:password;; and typing that with your own name and password produces a working code. It is long, though: a typical one needs version 4, 41 beads across with the border.

Do I have to use Perler beads and DMC floss?

No. Any dark and light pair with enough contrast can work, and Hama Midi and Artkal S beads are 5 mm like Perler's, so the bead counts and board sizes hold. Only the color names come from the Perler and DMC lists. To turn a picture, not a link, into a chart, use the Perler bead pattern maker or the cross stitch pattern maker.