Pixelandia

Diamond Painting Pattern Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

120 x 120
30
Options

How to make a diamond painting pattern from a photo

  1. Load the photo

    Choose picture opens a file, and a photo dropped on the preview or pasted from the clipboard loads the same way. Crop it to the shape of the canvas first, because the photo's proportions are kept.

  2. Size it in drills and pick the colors

    Width in drills runs from 30 to 240 and starts at 120, which is 30 cm at 2.5 mm a drill. Most colors starts at 30 and reaches 80. The lines under DMC drills to use give the drill total and the finished size as you move either slider.

  3. Download the chart and the drill list

    Download pattern (PNG) saves one sheet with a symbol on every drill, the finished size, and each DMC number with the quantity to buy. Download picture (PNG) is the image by itself, one flat square per drill.

Diamond painting pattern maker features

A drill list in DMC codes

Loose drills are sold by DMC number, so the list is written that way: 310 Black, 3865 Winter White and so on, each with the number of drills it takes. The total sits above the list: 14,400 for the 120 by 120 chart the tool opens with.

Canvas size from the drill grid

Finished size is the grid multiplied by 2.5 mm, the width of a square drill, given in centimeters and inches. The slider covers canvases from 7.5 cm to 60 cm across.

Any number of colors up to 80

Most colors is a ceiling, and Any removes it. Shades that stand for the whole photo are found first and then matched to drills, so a small but distinct detail, such as the color of an eye, is less likely to be lost.

Drill look

With Drill look ticked, every square is drawn as a cut gem with a lit facet along the top and a shaded one along the bottom. It hints at the texture of the finished piece.

Full drill unless you say otherwise

Remove background starts unticked, so the whole rectangle is covered in drills. Tick it and a plain backdrop is left bare.

A chart laid out like a kit canvas

The downloaded chart fills each square with its color and prints the symbol in black or white, whichever shows up better. Heavier lines fall every 10 drills, and the edges are numbered every 5. Tick Symbols to bring them onto the page as well: beside each color in the list, and on the drills of the preview, which is enlarged until a symbol fits and can be scrolled.

What is diamond painting?

Diamond painting is a mosaic made of small faceted beads called drills. The canvas is printed with a grid of symbols and coated with adhesive under a protective film. You peel the film back a section at a time, pick up each drill with a pen, and press it onto its symbol. A kit is full drill when drills cover the whole canvas and partial drill when they cover only part of the picture.

Square drills measure 2.5 mm and sit edge to edge like tiles. Round drills are 2.8 mm and leave small gaps. Their colors follow the numbers DMC gives its embroidery floss, and sellers generally stock 447 of them. Because drills and floss share one numbering, the same photo can be charted for thread with the cross stitch pattern maker.

Diamond painting canvas sizes in drills

For 2.5 mm square drills, with inches rounded. Set Width in drills to the first number. The second follows from your photo, so crop it to the shape of the canvas.

Common diamond painting canvas sizes with their grid and total in 2.5 mm square drills
CanvasDrillsDrills in all
20 x 30 cm (8 x 12 in)80 x 1209,600
30 x 40 cm (12 x 16 in)120 x 16019,200
40 x 50 cm (16 x 20 in)160 x 20032,000
50 x 70 cm (20 x 28 in)200 x 28056,000
60 x 80 cm (24 x 32 in)240 x 32076,800

More pattern tools

Diamond painting pattern maker FAQ

Should a custom photo be done in square or round drills?

Square drills suit photos. At 2.5 mm they butt against each other, so the picture has no gaps and fine detail holds. Round drills are 2.8 mm, easier to place, and leave a little canvas showing between them. The size the tool gives and its Drill look preview are for squares. The same chart in rounds comes out about 12% larger, so 120 drills span 33.6 cm instead of 30.

How big should a diamond painting of a face be?

Kit sellers advise at least 30 by 40 cm for one face and 40 by 50 cm or more for two people. In square drills that is 120 by 160 and 160 by 200. Width in drills stops at 240, a canvas 60 cm wide. Cropping close to the face does more for a likeness than any setting.

How many colors does a custom diamond painting need?

That depends on the photo more than on any rule. Most colors starts at 30, which handles a pet or a portrait against a simple backdrop. Skies, skin and fur shade more smoothly as you raise it toward 80, and artwork in flat color needs far fewer. Every extra color is one more bag to buy and sort, so stop when the preview stops improving.

Can I buy every DMC number in the list as a drill?

Most of them, but check. The tool matches against 454 DMC floss numbers, while drill sellers generally carry 447, and some list 445 in round. Compare the list with your seller's color chart before you order. Where a number is missing, take the closest shade they do stock and note the swap on the chart. Order a few more than each count, since drills are small and easy to lose.

How do I turn the chart into a canvas I can stick drills to?

The tool makes the chart and stops there. Hobbyists who build their own canvas print the chart at true size, so that ten squares measure 25 mm, and lay a clear double-sided adhesive sheet over the print. A 120-drill chart is 30 cm wide, wider than letter or A4 paper, so it has to be printed in tiles and joined. Try one row of drills on the print before you cover it all.

Can I make a partial drill design?

Yes, when the subject sits on a plain backdrop. Tick Remove background and the backdrop squares are left empty and drop out of the drill counts, so only the subject is charted. In a bought partial drill kit the uncovered area is printed artwork. Here it is blank, so the design works best on a canvas or card whose own color you like.

What do 3D and 5D mean on drill listings?

They describe the facets cut into each drill, not the picture. A 3D drill has three facets on each side, nine in all. Drills sold as 5D have more, listed as 13 or 15 depending on the seller, and throw back more light. Either kind sits on the same 2.5 mm grid, so the label makes no difference to the chart you download here.

Is Dithering a good idea for diamond art?

It trades tidy blocks for smoother shading. With it ticked, two drill colors are mixed in a speckle that reads as a shade in between from across a room, which helps skies and skin. Up close you get what crafters call confetti: lone drills placed one at a time, where solid areas fill a row at a stroke. Compare both previews before you decide.

Will the drills match the colors on the preview?

Near enough to plan with, not exactly. The preview paints each DMC number as one flat screen color. Real drills are faceted and throw light back, and the same number can differ a little from one seller or batch to the next. Judge close calls with the drills in your hand, in daylight, before you fill a large area.

How do I get an exact 30 x 40 cm canvas?

Crop the photo to 3:4 before you load it, then set Width in drills to 120. There is a slider for width only, and the height is worked out from the photo's proportions. An uncropped phone photo gives an odd grid such as 120 by 90 or 120 by 213. The table above lists the grid for the usual canvas sizes.

Is diamond painting closer to cross stitch or to paint by numbers?

It borrows from both. Like cross stitch it is worked from symbols on a square grid, with colors numbered the DMC way. Like paint by numbers the guide is printed on the canvas itself, so there is no counting. The material is its own: faceted drills held by adhesive in place of thread or paint. To paint the same photo instead, the paint by numbers generator makes a numbered outline.