Pixelandia

Sprite Sheet Cutter

 

Free. No watermark. No sign-up.

A PNG works best. You can also drop a sheet on the preview or paste one.

Where to cut
Which frames to use
Animation preview
10 fps, 100 ms a frame
Download

Frames

Tap a frame here or on the sheet to leave it out or put it back.

How to cut a sprite sheet into frames

  1. Load the sheet and read the lines

    Press Choose sprite sheet. The tool hunts for clear gaps between the sprites and draws green lines where it thinks each cell ends. Cells that will be saved get a green outline and, where there is room, a number that shows their place in the output.

  2. Correct the grid

    With Rows and columns picked, type how many frames run across and how many run down. Or switch to Frame size and enter one frame's width and height in pixels. Offset and Spacing deal with a border or with gaps.

  3. Choose frames and save

    Tap a cell on the sheet to leave it out, and tap again to bring it back. Watch the loop in the small preview, set Speed, then press Download frames (ZIP) or Download GIF.

Sprite sheet cutter features

Two ways to set the grid

Rows and columns splits the sheet evenly, from 1 to 64 each way. Frame size takes a width and a height and fits in as many whole frames as the sheet has room for.

Detect grid

Looks for the finest split into equal frames where every cut runs along clear pixels and no column or row of cells is blank. A border around the sheet goes into Offset, and gaps go into Spacing when it can tell them from empty room inside the frames. It needs clear pixels between the sprites, so treat the answer as a first guess.

Offset and spacing on each axis

Offset X and Offset Y step over a border. Spacing X and Spacing Y step over the gap between one cell and the next. The lines move as you type.

One row at a time

Use frames from narrows the cut to a single row, for sheets that keep a walk, a jump and an attack on rows of their own.

Blank cells skipped

Leave out empty frames drops any cell without a single visible pixel, such as the spare slots at the end of a last row that isn't full.

Flat backgrounds removed

For a sheet painted on one solid color, Make the background color clear wipes every pixel that matches the top left corner exactly.

PNG frames and a looping GIF

The ZIP holds one numbered PNG for each frame, with partly see-through pixels kept. The GIF loops forever at 1 to 30 frames per second. Scale enlarges both from 1x to 8x with hard edges.

How sprite sheets are laid out

Most sheets are a plain grid. Every frame sits in a cell of the same size, and the cells are read left to right, then down. A sheet with only one row is often called a strip. Cells of 16, 32, 48 and 64 pixels are the usual sizes, so a sheet 256 pixels wide with 32-pixel frames has 8 columns.

A sheet with several animations tends to give each one a row. RPG Maker MV and MZ character sheets are a well-known case: each character is 3 frames wide and 4 rows tall, the rows face down, left, right and up, and a frame is 48 x 48 pixels by default. A full sheet holds 8 characters in 12 columns and 8 rows, which comes to 576 x 384 pixels.

The other kind is a packed atlas, where sprites of different sizes are fitted together to waste as little space as possible. An atlas has no grid. It comes with a data file that lists where each sprite is.

Offset and spacing under other names

These two numbers go by different names from program to program. If the page you got a sheet from gives values for one of them, type those into the matching boxes here.

ProgramBorder around the sheetGap between frames
This toolOffset X, Offset YSpacing X, Spacing Y
Unity Sprite EditorOffsetPadding
Godot SpriteFramesOffsetSeparation
TiledMarginSpacing

More pattern tools

Sprite sheet cutter FAQ

How do I find the frame size of a sheet I downloaded?

Look at the page it came from first, since many artists state it. If not, count the sprites across and divide the sheet's width by that count. The width is printed under the preview. Do the same going down for the height. You can also type the counts into Columns and Rows and read the frame size the tool works out.

What can I do with a sheet whose sprites are all different sizes?

That is a packed atlas, and a grid can't cut it. It was made with a data file, usually JSON or XML, that holds each sprite's rectangle, and the engine needs that file. This tool only cuts equal cells. Sprites of different sizes that still sit in cells of one size cut fine, with empty room around the small ones.

Why are the edges of my GIF jagged?

A GIF pixel is either there or not. It has no half-transparent pixels, so the soft edge of a sprite turns into a hard one. Here, pixels under half opaque become clear and the rest become solid. For a smooth edge, set GIF background to A color and choose the color the GIF will sit on. The edge pixels are then blended into it.

How do I get one animation out of a sheet that has several?

If each animation has its own row, set Use frames from to that row. On an RPG Maker character, row 1 is the walk facing down. If an animation takes only part of a row, tap the cells you don't want, either on the sheet or in the Frames list below it. Use every frame brings them all back.

Why do the cuts land in the wrong place?

The sheet probably has a border or gaps the grid doesn't know about. Raise Offset until the first line meets the first sprite's cell, then Spacing until the rest line up. In Rows and columns mode the offset counts as a border on every side. In Frame size mode cutting starts at the offset, and pixels left over on the right and bottom are ignored.

Which GIF speeds are exact?

A GIF times each frame in hundredths of a second, so only speeds that divide 100 evenly are exact: 1, 2, 4, 5, 10, 20 and 25 frames per second. At other speeds the tool mixes two delays to keep the total right. At 12 fps, frames last 80 or 90 milliseconds. Walk cycles usually look right between 8 and 12.

Can I remove a magenta or green background?

Yes, when it is one flat color. Make the background color clear shows up for sheets whose top left pixel is solid, with a swatch of the color it will remove. Only exact matches go, so a sheet saved as a JPG, where the background is slightly uneven, keeps most of it. The cleared pixels are transparent in the PNG frames and the GIF.

Are the frames saved at their original size?

At 1x Scale, yes: each PNG has the frame's own pixels and nothing is resampled. The other scales, 2x, 3x, 4x, 6x and 8x, repeat every pixel in a block, which keeps pixel art crisp. The files are named after the sheet and numbered from 01 in cutting order, so they sort correctly in any folder.

How many colors does the GIF keep?

A GIF made here has one table of 256 colors, and one slot goes to transparency when the frames have clear pixels. Up to that many, every color is kept as it is. Past it, the nearest colors are merged, which shows on gradients and photos. The PNG frames in the ZIP have no such limit.

How many frames can one sheet be cut into?

Up to 1,024, with as many as 64 columns and 64 rows. The sheet itself can be up to about 16.7 million pixels, which is 4,096 x 4,096. A GIF can hold 24 million pixels across all its frames at the chosen scale. If you go over, lower Scale or leave some frames out.

Can I rebuild the sheet with a different layout?

Yes. Download the frames, unzip them, and open them all in GIF to Sprite Sheet. It places loose PNG files on a new sheet with the columns, spacing and padding you choose, which is a quick way to strip the gaps out of a sheet or turn a grid into a single strip.