String Art Generator
Free. No watermark. No sign-up.
A close-up face or one bold shape on a plain background. Drop or paste works too.
Crop and contrast
Nails, thread and template
- 0 lines on 240 nails.
- Thread: about 0 m (0 yd) for a frame 40 cm across the nails.
- Nails sit 5.2 mm (0.21 in) apart.
- The template prints at actual size on 6 sheets of Letter (2 rows of 3), with every nail numbered.
Step through the lines
The thread starts tied to nail 1.
How to make a string art pattern from a photo
Choose and crop the photo
Press Choose photo, then open Crop and contrast. Zoom, Move across and Move down bring the face or shape to the middle of the frame, and Photo in the frame shows what the thread will aim for.
Set nails, lines and thread
Nails runs from 120 to 360 and Lines of thread from 500 to 5,000. Thread weight is how dark one pass of your thread is, from 6% for fine thread to 40% for heavy.
Watch it wind
The preview fills in as each line is worked out, the most useful lines first. Under it, Step through the lines replays the winding one line at a time.
Take it to the workbench
Type your Frame size, then press Download nail order (TXT) for the winding list and Download nail template (PDF) for a sheet that marks where every nail goes.
What the string art generator gives you
One unbroken thread
The pattern is a single path from nail to nail. You tie on once and wind to the end without cutting.
A nail order made for ticking off
The text file lists the nails ten to a row with the line numbers in front, and leaves a gap after every fifty lines.
A nail template at actual size
The PDF draws each nail position at the true size of your frame, spread over as many Letter or A4 sheets as that takes, with a 50 mm line for checking the print.
Thread length for your frame
Give the frame size in centimeters or inches and the tool totals the thread in meters and yards. It also tells you the gap between neighboring nails.
Round or square
Nails are numbered clockwise: from the top of a round frame, from the top left corner of a square one.
Black thread or white
Wind black thread over a white board, or white thread over a black one, where the thread draws the light parts of the photo and the board is the shadow.
It knows when to stop
When no further line would bring the board closer to the photo, the winding ends short of your limit, and the count shows how many lines it took.
Any line on demand
Back, Next and the slider under the preview show the winding up to any line, with that line picked out in green and its two nails named.
What is string art?
String art is a picture made from straight runs of thread pulled tight between nails. The older kind builds curves out of straight lines. Mary Everest Boole had children stitch thread through holes pricked in card to get a feel for geometry, and wrote the method up in her 1904 book The Preparation of the Child for Science.
Turning a photo into thread is much newer. In 2016 the Greek artist Petros Vrellis showed portraits made of one black thread wound around 200 pegs on a 28 inch (71 cm) aluminum rim, crossing the circle 3,000 to 4,000 times in an order chosen by a computer. No single line means anything. The face comes from how many threads pass over each spot. This tool works the same way: it keeps choosing the line that brings the board closest to your photo, then moves to the nail at the far end and chooses again.
Nail spacing by frame size
The gap between nails is the distance around the frame divided by the number of nails. These are for a round frame, measured across the nails. Below about 4 mm, nails get hard to hammer evenly, and the template numbers every fifth nail in place of every one.
| Frame | 200 nails | 240 nails | 300 nails | 360 nails |
|---|---|---|---|---|
| 30 cm | 4.7 mm | 3.9 mm | 3.1 mm | 2.6 mm |
| 40 cm | 6.3 mm | 5.2 mm | 4.2 mm | 3.5 mm |
| 50 cm | 7.9 mm | 6.5 mm | 5.2 mm | 4.4 mm |
| 60 cm | 9.4 mm | 7.9 mm | 6.3 mm | 5.2 mm |
More pattern tools
Grid Maker
Add a drawing grid to any photo.
Color by Number Generator
Turn a picture into a color by number page to print.
Paint by Numbers Generator
Turn a photo into a numbered template to paint.
Pixel Art Generator
Turn a photo or drawing into pixel art on a grid.
Pixel Art Maker
Draw pixel art online, pixel by pixel.
Sprite Maker
Draw sprites frame by frame and export a sprite sheet.
Spreadsheet Pixel Art Generator
Turn a picture into colored cells for Google Sheets or Excel.
Pixel Art Resizer
Scale pixel art up or down without blur.
8-Bit Image Converter
Turn a photo into 8-bit or 16-bit retro art.
String art generator FAQ
How many nails does string art need?
For a photo, 200 to 300 nails on a frame 30 to 50 cm across is the usual range. More nails draw finer detail, but they sit closer together and are harder to hammer evenly. The Nails slider covers 120 to 360, and the gap between nails for your frame is shown under the preview.
How many lines of thread does a portrait take?
Usually between 2,000 and 4,000. With too few the picture looks thin, and with too many the last ones only darken the rim. Treat Lines of thread as a ceiling and read the count afterwards. Our sample portrait stops by itself at 1,956 lines on the starting settings.
How much thread will I need?
The tool adds up every line for the frame size you enter. The sample comes to about 620 m (670 yd) on a 40 cm frame. Length grows in step with the frame, so the same pattern at 60 cm takes half as much again. Buy a spool with room to spare, because every turn around a nail uses a little more.
What kind of thread should I use?
Thin and strong. Photo patterns like these are wound in ordinary sewing thread, most often black, because thousands of lines have to cross without building up a mat. Embroidery floss and crochet thread belong to the other kind of string art, where a few dozen bold lines outline a heart or a word.
What does Thread weight mean?
It is how much one pass of your thread darkens the board. Fine thread on a large frame is a low weight, and the picture needs more lines to fill in. Thick thread on a small frame is a high weight and needs fewer. If a finished piece looks paler than the preview did, the weight was set too high for that thread.
What board and nails should I use?
Plywood or solid wood about 1 cm thick or more. Thinner sheet lets nails work loose under the pull of thousands of lines. Nails 12 to 25 mm long (half an inch to an inch) with small heads are typical. Drive them all to one height and leave enough shank showing to hold many layers of thread.
How do I use the nail template?
Print the PDF at 100%, not Fit to page, and measure the 50 mm line on the first sheet. Join the sheets where they overlap, following the row and column printed on each, and fix them to the board. Hammer a nail on every cross. Then cut the paper away inside the nail line and leave the numbered rim in place for winding.
How do I keep my place while winding?
Work from the text file one row at a time: ten nails, then a tick. The gap after every fifth row marks fifty lines. If you lose track, note the nail your thread is on and the two or three before it, and search the list for that run. Step through the lines will draw any line number on the preview.
What photo works best for string art?
A close-up with strong contrast and a plain background. A face works when it fills the frame, while fine texture such as grass or knitwear is lost. Crop in with Zoom, then raise Contrast until Photo in the frame shows clear darks and lights. Black thread can only darken, so a pale background costs no thread at all.
Why did it stop before the number of lines I set?
Each candidate line is tested against the photo. Once the best line left would overdo spots that are dark enough more than it helps the ones that aren't, the winding ends. Lower Thread weight for a finer, denser winding of the same picture, or raise Contrast to give it more to draw.
Should I pick a round or a square frame?
Round is the classic for portraits, since every nail can reach every other one across the picture. On a square frame the tool skips lines between two nails on the same side, which would only lie along the edge. Square earns its keep when the photo has detail in the corners that a circle would crop off.
How many sheets does the nail template print on?
That depends on the frame. A round frame up to about 15 cm fits one Letter or A4 sheet, numbers included. A 40 cm frame takes six sheets in two rows of three, overlapping by 10 mm. The number for your frame is listed under the preview before you download anything.