Pixelandia

Needlepoint Pattern Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

Canvas mesh

13 stitches to the inch.

2 in
    78 x 78
    10
    Options

    From photo to needlepoint chart in four steps

    1. Open a photo

      Choose picture opens a photo you pick. Dropping one on the chart or pasting it does the same. Until you do, the tool shows a blue and white ginger jar, so there is a finished chart to look at.

    2. Pick the canvas mesh

      Canvas mesh offers 10, 13, 14 and 18. Width in stitches runs from 20 to 250 and starts at 78, which is 6 inches on 13 mesh. Stitched area gives the size in inches and centimeters and changes as you move either one.

    3. Set the margin and the colors

      Bare canvas margin goes from 1 to 4 inches a side and starts at 2. Canvas to cut adds it to the stitched area. Most colors caps the number of DMC shades, from Any up to 40, and starts at 10.

    4. Save the chart

      Download pattern (PNG) saves a symbol chart with the mesh, both sizes and the DMC list printed on it. The thread table and the tent stitch preview sit under the chart, and Download stitched preview (PNG) saves the preview on its own.

    What the needlepoint pattern maker works out

    Four canvas meshes

    Switch between 10, 13, 14 and 18 mesh and every number follows. Under the sizes, Stitch with names a thread and a tapestry needle for that mesh, such as size 3 pearl cotton and a size 20 needle on 14 mesh.

    The canvas to cut

    Needlepoint needs bare canvas around the stitching for handling and finishing. The tool adds your margin to all four sides and gives the piece to cut, so a 6 by 7 inch design with a 2 inch margin asks for 10 by 11 inches.

    Square inches and yards per color

    Thread for needlepoint is worked out from the area to cover. The thread table turns each color's stitches into square inches on your mesh, then into yards by Kreinik's rule of thumb for tent stitch, 1.5 yards to the square inch.

    A tent stitch preview

    The design is redrawn with a slanted stitch over every canvas intersection and a strip of bare canvas around it, holes and all, which shows the texture a flat grid can't.

    Background stitched by default

    Remove background starts off, because a needlepoint canvas is normally covered edge to edge. Turn it on to chart a motif alone and choose the background color yourself.

    454 DMC shades by number

    Each square takes the nearest of 454 DMC shades. The chart carries a symbol in every square, a heavier line every 10 canvas threads and a number every 5 along the top and side.

    What is needlepoint?

    Needlepoint is embroidery on stiff, open canvas. Each stitch crosses one intersection of the canvas threads, and the stitches sit side by side until the canvas is covered. Mesh is how many of them fit in an inch, and 10, 13, 14 and 18 are the meshes most shops stock.

    The basic stitch is the tent stitch, a short diagonal. It can be worked three ways, half cross, continental and basketweave, which look alike from the front and differ on the back. Tent stitch on canvas was a common household craft by the 16th century. Early in the 19th century, printers in Berlin began selling designs printed on squared paper and colored by hand, one square to a stitch. Berlin wool work was in fashion in Europe and America from 1804 to about 1875, and a chart from this tool is read the same way.

    Needlepoint mesh, thread and needle

    The thread has to fill the hole without crowding it, so it gets finer as the mesh number rises. The size column shows how wide 100 stitches come out.

    MeshThreadTapestry needle100 stitches
    10tapestry woolsize 1810.0 in
    13tapestry wool or size 3 pearl cottonsize 207.7 in
    14size 3 pearl cottonsize 207.1 in
    18size 5 pearl cotton or 4 strands of flosssize 225.6 in

    Threads follow DMC's needlepoint guide and needlepoint shop charts. Stitchers vary, so try a few stitches on a spare corner first.

    More pattern tools

    Needlepoint pattern maker FAQ

    What mesh is best for a first needlepoint?

    A larger mesh, 12 or 13 to the inch, with a simple design and few colors. The holes are easy to see and a small piece is soon finished. That is why the tool opens on 13 mesh. Keep 18 mesh for a later project with fine detail, such as a belt or a small ornament.

    Should I stitch in continental or basketweave?

    Learn both. Continental runs in rows, is quick to learn and suits single lines and small patches, but it pulls the canvas out of square. Basketweave runs in diagonal rows, distorts the canvas least and leaves the firmest backing, so it is the one for backgrounds and other large areas. It also takes the most thread. The chart serves either, since they look the same from the front.

    Does half cross stitch save thread?

    Yes. Half cross uses the least thread of the three tent stitches, because very little of it crosses the back of the canvas. The price is a thin stitch with no padding behind it, which wears badly on a cushion or a seat. Keep it for pieces that will be framed, and stitch anything that gets handled in continental or basketweave.

    How much blank canvas should I leave around the design?

    Two inches on every side is the usual advice, and three is kinder if the piece will be framed or made into a pillow. The margin gives the finisher something to hold and lets you tack the canvas to stretcher bars, which keep it square while you stitch. Bare canvas margin sets it, and Canvas to cut includes it. Bind the cut edges with masking tape so they don't fray or catch the thread.

    Do the DMC numbers work for wool and pearl cotton?

    The numbers are DMC six-strand floss shades. DMC sells pearl cotton under the same numbers in a smaller range, so check that a shade exists in size 3 or size 5 before you plan around it. DMC tapestry wool has its own four-digit numbers, so for wool treat the chart as a color guide and match skeins by eye or with a conversion chart.

    How much thread does a needlepoint canvas take?

    The thread table gives square inches per color. Kreinik's rule of thumb for tent stitch is 1.5 yards per square inch plus 10% to 20%. The Yards column applies the 1.5 and leaves the extra to you. The rule names no mesh, so stitch one test inch in your own thread if the amount matters. DMC floss and tapestry wool come in 8 meter skeins, pearl cotton 3 in about 15 meters and pearl cotton 5 in about 25.

    How many strands of floss cover needlepoint canvas?

    More than cross stitch uses. Colonial Needle's guide gives 6 strands on 14 mesh, 7 or 8 on 13 mesh and 4 on 18 mesh. Other teachers start with 3 or 4 on 18 mesh. Canvas color, floss color and your tension all change the answer, so stitch a few rows on the margin and add a strand if canvas shows through.

    How do I get the chart onto blank canvas?

    By counting. One square of the chart is one intersection of canvas threads, not one hole. Start from the top center or the middle and count out from there, using the heavier lines every 10. Some stitchers mark the canvas first with a light-colored archival pen, one color at a time. Count twice before you stitch, since a miscount moves everything after it.

    Which photos make a good needlepoint chart?

    Photos with one subject and a calm background. Crop a portrait to the face. Detail depends on stitches, so a face needs far more than the 78 the tool starts with, and a finer mesh keeps the piece a sensible size: 150 stitches are 15 inches wide on 10 mesh and 8.3 inches on 18.

    What is petit point?

    Tent stitch on fine canvas. As a rough guide, 16 to 20 holes to the inch is petit point, 8 to 16 is gros point, and fewer than 7 is quick point. By that measure the tool's 18 mesh is petit point and its 10, 13 and 14 mesh are gros point. The stitch is the same on all of them; only its size changes.

    How do I straighten a canvas that has pulled out of shape?

    Block it. DMC's method is to spray the whole canvas with warm water, pull it square on a board, and pin it at intervals of about 2 cm, or three quarters of an inch. Leave the pins in until the canvas is bone dry. Many needlepoint shops block as part of finishing a piece, but not all, so ask.