Pixelandia

Latch Hook Pattern Maker

Free. No watermark. No sign-up.

Or drop a picture on the preview, or paste one.

Rug canvas, holes per inch

The usual latch hook canvas, used in most kits.

1 in
in
    45 x 45
    6
    Options

    Charting a latch hook rug, step by step

    1. Start from a bold picture

      Press Choose picture and open a drawing, a logo of your own or a photo with big, clear shapes. A rug has only about 14 knots to the square inch, so fine detail is lost. The toadstool on screen is the kind of picture that hooks well.

    2. Size the rug in knots

      Width in knots goes from 15 to 150. It starts at 45, a 12 inch rug on 3.75 mesh. Rug canvas, holes per inch switches between 3.3, 3.75 and 5, and Canvas border adds 1 to 3 inches a side for the hem. Rug size and Canvas to cut update as you go.

    3. Count the yarn, then download

      Colors sets how many yarn colors the rug uses, from 2 to 20. Type your pack size in Strands per pack and the table under the chart lists strands, packs and yards for each color. Download pattern (PNG) saves the chart, and Download rug preview (PNG) saves the pile picture.

    Latch hook pattern maker features

    One square, one knot

    The chart is counted in knots, 45 by 45 to begin with, and the tool turns that into inches and centimeters for the canvas you picked.

    Three rug canvases

    3.75 holes per inch is the canvas in most kits. 3.3 gives a bigger rug from the same chart and 5 gives a smaller, finer one. The 45 knot sample is 13.6, 12 and 9 inches wide on the three.

    Strands and packs per color

    A knot takes one strand, so strands equal knots. Packs divides them by your pack size and rounds up, color by color. It starts at 320 strands, the size of Herrschners' pre-cut packs.

    Yards for cutting your own

    Strand length starts at 2.5 inches, the length pre-cut yarn comes in. The Yards column multiplies it out, so you know how much to buy if you cut strands from a skein. Longer strands make a deeper pile and use more yarn.

    Canvas with the hem included

    Canvas to cut adds the border to every side. A 12 inch rug with a 1 inch border needs a 14 inch square of canvas.

    Lines that match the canvas

    Rug canvas has a blue line woven in every 10 holes. The printed chart has a heavier line every 10 squares, so a block on paper is a block on the canvas.

    A pile preview

    Under the yarn table the rug is drawn as cut pile, each knot a tuft that falls over the row below, with the canvas border around it. Soft edges in the picture show up here before you buy yarn.

    What is latch hooking?

    Latch hooking makes a shaggy rug by knotting short pieces of yarn onto open canvas. The tool is a hook with a small hinged latch below its tip. You fold a strand in half around the shank, push the hook under one canvas thread, lay both tails in the hook and pull back. The latch closes over the tails and draws them through the fold, which tightens into a knot with two ends standing up.

    The latch itself comes from the knitting machine needle invented in 1847. Hand tools that paired it with a hook appeared in the 1920s, wool latch hook rugs were popular through the 1930s, and acrylic yarn kits took over in the 1970s and 1980s. Kits still work the same way: a canvas, a chart or printed design, and bundles of yarn cut to about 2.5 inches.

    Latch hook rug sizes in knots

    Kits are commonly sold in the sizes below. On 3.75 mesh canvas they come to these knot counts, which is the width to set and the number of strands to expect.

    RugKnots acrossRowsKnots in all
    12 x 12 in45452,025
    15 x 20 in56754,200
    20 x 30 in751138,475
    30 x 50 in11318821,244

    More pattern tools

    Latch hook rug questions

    How long does a latch hook rug take?

    Count on 350 to 700 knots an hour. That range comes from one rug studio's published times for its own kits, and a beginner will be at the slow end. The 12 inch sample has 2,025 knots, so 3 to 6 hours. A 20 by 30 inch rug has about 8,500 and takes 12 to 24 hours. The knot total is printed above the color list.

    How do I bind the edges of a latch hook rug?

    Trim the canvas to about 1 inch past the last row of knots, fold that border to the back and whipstitch it down with strong thread. Then sew rug binding tape over the folded edge to cover the raw canvas. A rug for the floor also wants a non-skid backing. Set Canvas border to the hem you plan, so the canvas is cut large enough.

    Can I cut my own latch hook yarn?

    Yes. Wrap yarn around a strip of cardboard and cut along one edge, and every strand comes out the same length. Cut a card half as wide as the strand you want. Rug yarn or any heavy yarn works. Type the length in Strand length and the Yards column shows how much yarn each color needs.

    How many strands come in a pack of latch hook yarn?

    It depends on the maker. Herrschners packs 320 strands of 2.5 inch acrylic rug yarn. Bundles sold in the UK often hold 400 strands of 5.5 cm. Check the label, then change Strands per pack to match. Packs are counted per color, since a part-used pack of red can't fill in for blue.

    What mesh is latch hook canvas?

    Most is 3.75 mesh, meaning 3.75 holes to the inch. Zweigart also weaves rug canvas at 3.3 and 5 holes per inch, and all three are sold for latch hook. If you already own canvas, lay a ruler on it and count the holes in 4 inches: 15 means 3.75 mesh.

    Which way do I work a latch hook rug?

    Start with the bottom row and go across it, then move up a row at a time. Finished pile then falls toward you and stays out of the way of the next row. The chart numbers its rows from the top, so begin at the highest row number and work back to row 1.

    How many colors should a latch hook pattern have?

    Colors starts at 6 and goes up to 20. Small rugs read best with 5 to 8, because each color has to fill an area big enough to see in the pile. Every extra color is also another pack to buy, even if the chart only needs 30 strands of it. Check the Packs column before adding more.

    What kind of picture makes a good latch hook rug?

    One with large flat shapes and strong contrast. At 3.75 mesh a 12 inch rug is only 45 knots wide, so an eye might be two knots and thin lines disappear. Cartoons, flags, simple animals and bold lettering work. A portrait needs a rug several feet wide before a face is recognizable.

    How do I copy the chart onto the canvas?

    You don't have to. Count instead: a square on the chart is a square of the canvas, and the heavier chart lines fall on the canvas's blue lines. If you would rather see the design on the canvas, mark the squares with a permanent marker first, following the printed chart, and let the ink dry before you hook.

    Why do the colors have names like light blue and not yarn numbers?

    Latch hook yarn has no shared color range, and every maker numbers its own. The tool picks colors from your picture and gives each a plain name and a hex code. Take the rug preview or the printed chart to the shop, or hold it beside the screen when you order, and choose the nearest yarn by eye.

    Is latch hook the same as rug hooking?

    No. Rug hooking pulls continuous loops of wool strip or yarn up through a woven backing with a plain hook, and nothing is knotted. Latch hook ties separate short strands onto canvas, which leaves a cut, shaggy pile. A chart of squares suits latch hook because the canvas is a grid.