Pixelandia

Minecraft Spiral Staircase Generator

Seen from above, this layer holds steps 1 (lower half) and 2 (upper half).

Light green is a slab in the lower half of the layer, dark green one in the upper half. Numbers count the steps from the ground.

Free. No watermark. No sign-up.

Walk check: it can be climbed

Each step is half a block, so you walk up without jumping. The least headroom is 3 blocks; the player needs 1.8.

8 (climbs 4)
Middle, second flight and wall
1

Spiral staircase block count

24 steps, 8 to a turn, clockwise going up. Each step rises half a block; a full turn climbs 4 blocks. That is 3 turns, and the top step is on the east side.

  • Steps: 60 slabs, crafted from 30 blocks.
  • Column: 12 blocks.
LayerStepsSlabs in the steps
1 and 25
3 and 45
5 and 65
7 and 85
9 and 105
11 and 125
13 and 145
15 and 165
17 and 185
19 and 205
21 and 225
23 and 245

How to plan a spiral staircase in Minecraft

  1. Measure the stairwell

    Width in blocks is the round space the stairs fill, from 2 to 25. Height to climb in blocks is the distance from the lower floor to the upper one, up to 64.

  2. Choose how you climb

    Under Steps made of, Slabs (walk up) rises half a block a step and Full blocks (jump up) a whole block. Going up it turns sets clockwise or counterclockwise, and First step starts on the picks the side of the first step.

  3. Read the walk check

    The box under the plan says whether a player fits, and gives the least headroom on the way up. Steps in one turn makes the climb gentler or steeper, and shows how far one full turn rises.

  4. Place one layer at a time

    The plan is a view from above with north at the top. Put down the numbered squares, press Up, and carry on. Download all layers (PNG) gives the whole climb on one sheet.

Minecraft spiral staircase generator features

A walk check on every design

Each step is tested against the blocks above it and the player's height of 1.8 blocks. The slider for steps in a turn only offers settings that pass, and the box turns red when a width has none.

Steps numbered from the ground

While the squares are big enough to read, every square of a step carries its number: step 14 on the plan is the fourteenth one you stand on. Light and dark green tell lower slabs from upper ones.

Slabs or full blocks

Slabs give stairs you can walk straight up. Full blocks use half as many pieces for the same height and climb twice as fast, with a jump at each step.

Column or open well

Center column fills the middle with blocks from bottom to top. Untick it for a well you can see down. On wider stairs, Middle width in blocks makes the middle bigger.

Double staircase

A second flight starts on the opposite side and winds the same way, drawn in blue. The two flights never cross.

Tower wall

Tick Tower wall around it to draw the ring of wall that encloses the stairs on every layer and to add it to the count. The 3D view leaves the wall out so the steps stay visible.

A 3D view you can turn

Turn view swings the model a quarter turn at a time. Hide the layers above this one shows the stairs as built so far.

Counts for crafting

The list gives the slabs or blocks in the steps, the column and the wall separately. For slabs it also works out how many blocks to craft them from.

How a spiral staircase works in Minecraft

Seen from above, a spiral staircase is a circle cut into wedges, like a pie. Each wedge is one step, and each step sits a little higher than the one before. Three numbers from the game decide whether it can be climbed. A player is 1.8 blocks tall and 0.6 wide. A rise of up to 0.6 of a block is walked up without jumping, which covers a slab at half a block. A jump reaches about 1.25 blocks, enough for a full block and no more.

The catch is overhead. After one full turn the stairs pass above themselves, so a turn has to climb the player's height plus the thickness of a step plus the step being taken. That takes at least 4 steps a turn with full blocks and 6 with slabs. Slabs are cheap to make: three blocks in a row on a crafting table give six.

Spiral staircase sizes that can be climbed

Slab stairs around a one-block column, except the 2-block size, which has no middle. Starts at is what the tool picks first, and the last two columns go with it.

WidthSteps a turnStarts atOne turn climbsLeast headroom
2Full blocks only44 blocks2 blocks
36 to 884 blocks3 blocks
56 to 1384 blocks3 blocks
76 to 19126 blocks5 blocks
96 to 25168 blocks7 blocks
116 to 312412 blocks11 blocks

More pattern tools

Minecraft spiral staircase generator FAQ

What is the smallest spiral staircase that works?

Two blocks wide: four full blocks in a 2 x 2 square, each one block higher than the last. A turn climbs 4 blocks and leaves 2 of headroom, so you can jump up it. The smallest you can walk up without jumping is 3 wide, with slabs around a one-block column: 8 steps and 4 blocks to a turn.

Why can't I walk up a 2-block spiral made of slabs?

There is no room for your head. Four slab steps climb only 2 blocks in a turn. Take off the slab above you and the half block you are stepping up, and 1 block is left for a player 1.8 blocks tall. The walk check turns red and says so. Go to 3 wide, or use full blocks.

How do I make a double spiral staircase?

Tick Double staircase. A second flight, in blue, starts half a turn round from the first and climbs the same way, like the double stair at the Chateau de Chambord. Each flight now passes under the other after half a turn, so it needs twice the steps in a turn: 8 with full blocks, 12 with slabs. That takes 3 blocks of width for blocks and 4 for slabs.

How do I fit a spiral staircase inside a tower?

Set Width to the space inside the tower walls. Tick Tower wall around it and the plan adds the wall as a gray ring, one size up from the stairs. Stairs 5 wide sit in a tower 7 across on the outside, with 16 wall blocks on each layer. Use First step starts on the to face the bottom step toward your door.

Can I use stair blocks instead of slabs?

Stair blocks let you climb a whole block without jumping, but each one faces north, south, east or west, and the steps of a round spiral turn a little every time. So the tool plans in slabs and full blocks. On a wide staircase you can swap stair blocks into a full-block plan wherever a few steps run in a straight line.

How many steps should one turn have?

More steps make a gentler climb and more headroom, but each wedge gets narrower. Fewer make it steeper with broad steps. The tool starts near one step for every block around the outside, and fewer where that would leave steps a single block big. Steps in one turn skips counts that would leave a wedge empty.

Which way should a spiral staircase turn?

Either way climbs the same. Clockwise and counterclockwise are mirror images, so choose by where the stairs should arrive. The line under the Spiral staircase block count heading names the side the top step ends on. If that is the wrong side, switch the direction or move the first step a quarter turn.

How do I place the lower and upper slabs?

Each layer of a slab staircase holds two steps. The light green one is a slab in the bottom half of the block and the dark green one a slab in the top half. In the game, aim at the lower half of a neighboring block's side for a bottom slab and at the upper half for a top slab.

How many blocks does a spiral staircase take?

It depends on the width and the height. The staircase the tool opens with, 5 wide and 12 high in slabs, takes 60 slabs and 12 blocks for the column. Sixty slabs are crafted from 30 blocks. The count under the tool updates with every setting and lists the wall on its own.

What happens when the stairs are shorter than one turn?

Nothing is ever overhead, so headroom stops mattering and the walk check says so. That is common with full blocks on a wide staircase: 11 wide starts at 24 steps a turn, which is 24 blocks of height before the stairs come round over themselves.