Pixelandia

Minecraft Skin Maker

100%
#059669

Point at the skin to see which body part it is

Free. No watermark. No sign-up.

Loading the 3D preview
Arm width
Show body parts

Start over

How to make a skin with the Minecraft skin maker

  1. Pick a starting point

    The page opens on a starter skin in a green hoodie. Open a skin loads a PNG of your own, and Blank skin gives a light gray body with an empty outer layer.

  2. Settle the arm width early

    Arm width is Classic, 4 px or Slim, 3 px. Choose before you paint the arms, because slim arms use a narrower part of the picture and the strip they skip turns hatched.

  3. Paint flat, check in 3D

    Choose a Color, then work on the unfolded skin with Pencil, Fill and the other tools. The line beneath it names the part, layer and side under the pointer. Drag the 3D preview to turn the character.

  4. Save the file

    Download PNG saves a 64 x 64 picture named after its arm width: minecraft-skin-classic.png or minecraft-skin-slim.png. The skin also waits on the page for your next visit.

Minecraft skin maker features

Paint straight onto the model

Tick Paint on the 3D model and a press on the character colors the pixel under the pointer. A press on the backdrop still turns the view, and Reset view puts the camera back.

Fill that stops at a seam

Fill colors the touching pixels of one color on one side of one part. It never runs from the chest onto an arm that happens to sit next to it on the flat picture.

Darken, Lighten and Noise

Darken and Lighten move a pixel by a tenth per stroke. Noise lays your color down with each pixel up to 12% darker or lighter, which gives cloth and hair a grain.

Mirror left and right

Paint the right arm and the left arm gets the same pixels flipped. Legs work the same way, and so do the two halves of the head and body. A dashed square marks where the copy will land.

Twelve part switches

Show body parts has a tick box for six parts on the Base layer and six on the Outer layer. A hidden part is covered in gray on the flat skin, leaves the model, and can't be painted until it returns.

Seven tools, seven keys

Pencil, Eraser, Fill, Color picker, Darken, Lighten and Noise answer to P, E, F, I, D, L and N. Ctrl+Z undoes, as far as 100 steps back.

Zoom, grid and part names

The minus and plus buttons enlarge the flat skin in steps of 100% up to 400%, and Move drags it around once it is zoomed. Grid lines outlines every pixel, and Part names prints Head, Hat and the rest across it.

Where each part sits on a Minecraft skin

The front of every part, in pixels counted from x 0, y 0 at the top left, the way the line under the flat skin reports them. Right and left are the character's own, so the right arm is on your left when the character faces you.

Pixel positions of the front face of each body part on the base and outer layers
Part and its outer pieceFront on the base layerFront on the outer layerSize
Head, Hatx 8 to 15, y 8 to 15x 40 to 47, y 8 to 158 x 8
Body, Jacketx 20 to 27, y 20 to 31x 20 to 27, y 36 to 478 x 12
Right arm, Right sleevex 44 to 47, y 20 to 31x 44 to 47, y 36 to 474 x 12
Left arm, Left sleevex 36 to 39, y 52 to 63x 52 to 55, y 52 to 634 x 12
Right leg, Right pants legx 4 to 7, y 20 to 31x 4 to 7, y 36 to 474 x 12
Left leg, Left pants legx 20 to 23, y 52 to 63x 4 to 7, y 52 to 634 x 12

Around each front, the right side, left side and back share its row, and the top and bottom sit above. With Slim, 3 px the arm fronts lose their last column and end at x 46, 38 and 54.

What a Minecraft skin is made of

A skin is a single PNG, 64 pixels on each side, that the game stretches over the player model. Of its 4,096 pixels the classic model draws 3,264 and the slim model 3,136. The rest are never shown.

The picture carries two full layers. The base layer is the body itself. The outer layer floats just off it: half a pixel out on the body, arms and legs, and a whole pixel out on the head. That gap is why hair, hoods and cuffs painted there look raised.

Until Java Edition 1.8 the second layer covered the head alone. Version 1.8 extended it to the whole body, let the left and right limbs be painted separately and added the slim model.

This page paints skins. To turn a finished one around and watch it walk, run or wave, open the file in the Minecraft skin viewer.

More pattern tools

Minecraft skin maker FAQ

How do I upload my skin to Minecraft: Java Edition?

Open the Minecraft Launcher, select Minecraft: Java Edition and go to the Skins tab. Press New skin, browse to the PNG, choose the wide or the slim player model to match your Arm width, and save. Your profile page on minecraft.net can change the skin as well. Either way you have to own the game.

How do I use a custom skin in Bedrock Edition?

On Windows, phones and tablets, open the Dressing Room and go to Classic Skins. Under Owned, press Import, then Choose New Skin, and pick the PNG. The game then asks which arm model fits it. The console versions have no way to import a skin file.

Should I choose classic or slim arms?

It is a matter of look. Classic arms are 4 pixels wide and slim arms 3, and nothing else on the body differs. Choose the same one when you upload. A slim skin worn on classic arms shows an unpainted stripe down each arm, and a classic skin on slim arms loses a column.

What happens to my arms if I switch Arm width halfway?

No pixel moves and none is deleted. What changes is how the arm areas are read: with slim arms the front, back, top and bottom are 3 pixels wide, and the left side and the back each start one pixel further left. A sleeve painted for classic arms looks shifted there, so repaint those sides.

Can parts of a skin be see-through?

On the outer layer, yes. A pixel left empty there, or removed with Eraser, shows the base layer beneath, which is how visors and torn sleeves are done. On the base layer, no. Java Edition draws the base fully solid, and an erased base pixel comes out black in the game.

How do I give hair, a hood or a jacket some depth?

Put it on the outer layer, which stands off the body. Tick Paint on the 3D model while the Outer layer is showing and your strokes land on it, even where it is still empty. To reach the base underneath, untick Outer layer in Show body parts, paint, then tick it again.

How do I shade a skin?

Fill each area with one color first, then break it up. Run Noise over cloth and hair for a slight grain. Use Darken under the hairline, beneath the arms and on the inner legs, and Lighten on the top of the head and the shoulders. One stroke changes a pixel once, however much you scrub over it.

Why are some squares hatched and won't take paint?

They lie outside every body part, so the game never draws them and the tool keeps them empty. Point at one and the line reads Not used by the game. Slim, 3 px adds hatched strips to each arm's area. A gray cover marks a part you hid under Show body parts.

Can I edit a skin I downloaded somewhere else?

Yes. Press Open a skin and choose the PNG. It has to be 64 x 64, or the older 64 x 32; any other size, such as Bedrock Edition's 128 x 128, is turned away with a note of what was found. An old skin is rebuilt at 64 x 64, its left arm and leg mirrored from the right. The tool also guesses the arm width and says so.

Why does my skin look right here but wrong in the game?

Usually for one of two reasons. The arm model chosen at upload doesn't match the Arm width you painted for. Or a piece on the outer layer is switched off: Java Edition lets a player hide the hat, jacket, sleeves and pants legs under Skin Customization, so the base should make sense alone.